Non Chlorinated Dichloromethane Free Spray Adhesives

What is Non Chlorinated Dichloromethane Free Spray Adhesives?

Non-chlorinated Dichloromethane Free Spray Adhesives are specially designed to be more healthy than other types of spray glues. Consequently, these are ideal for bonding a large selection of materials such as: permanent bonding of materials where immediate bond strength, water and high heat resistance are required.

Also they are suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials, vinyl, rubber and plastics, HPL, hard plastics, GRP, foams, HPL laminate surfaces and edging materials to MDF, chipboard and plywood substrates, and approved for bonding KYDEX® thermoplastic sheet to the substrate to name just a few.

The glues in this range are split into the following:

L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 500ml | 22Litre | 22KG | 110Litre | 110KG

TensorGrip® L22 is a 22 L / 22Kg spray glue pot, or TensorGrip® L22 500 ML aerosol cans, are ideal for permanent bonding of materials where immediate bond strength, water and high heat resistance are required. It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important

L72 One Way Stick Urethane Spray Adhesive 22Litre | 22KG

Our TensorGrip® L72 spray glue is a high performance, plasticiser resistant adhesive specially formulated for bonding vinyl, rubber and plastics.

TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre | 22KG | 110Litre | 110KG

TensorGrip® L21 spray glue is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. TensorGrip® L21 is designed for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required and can also be used for bonding sheet metals, where surface preparation is very important.

TensorGrip L19 - High Performance Laminate & Edging Spray Canister Adhesive / Glue 22Litre | 22KG | 110Litre | 110KG

TensorGrip® L19 spray glue has been designed for bonding of all HPL laminate surfaces and edging materials to MDF, chipboard and plywood substrates. L19 has undergone extensive testing on FORMICA ColourCore, Magnetic Laminate, Fundamentals, Ligna and DecoMetal ranges to name a few, and is now QUIN ASSURED as the premium choice for laminating.

TensorGrip L68 - Construction, Building & Interiors Spray Canister Contact Adhesive / Glue 22 Litre | 22KG

TensorGrip® L68 spray adhesive pot is a high-performance mist spray contact adhesive, designed and approved for bonding KYDEX® thermoplastic sheet to the substrate. It has been rigorously tested by the technical teams at both Quin Global and SEKISUI SPI, to produce an approved and endorsed product. TensorGrip® L68 is an extremely tough and dry neoprene blend contact adhesive, designed to bond low surface energy and non-porous surfaces permanently.

Dichloromethane Free Spray Adhesives Benefits

When it comes to these contact adhesives they come with a mix of the following features and benefits:

• Fast Drying
• Good Heat Resistance
• Very high Solids
• Non-Chlorinated Adhesive
• Bonds vinyl permanently
• Very high-temp resistance - 140°C
• Excellent plasticiser resistance
• Strong one-sided bonds
• Resists weathering, water, fuel, oil and many other plasticisers
• Repositionable dependant on application
• 100% resistant to delamination caused by plasticiser migration
• High Solids
• Good Heat Resistance
• Non-Chlorinated Adhesive - making this a healthy adhesive
• Easy Application Control
• Two sided bonding
• Permanent bond
• Immediate bonding
• Water resistant
• High Temp Resistance - 120°C
• Fast Flash off Time
• BS 6222 Bond Strength Approval by FIRA
• Ultra High Tack
• Formica approved
• Approved for bonding KYDEX® thermoplastic sheet
• Easy application control
• Moisture resistant
• LOW V.O.C
• 25% More Coverage Than Standard Canisters

Spray adhesive consistency

The consistency of these types of contact adhesives are mainly a fine consistent web like spray pattern.

Spray adhesive uses information

When it comes to this contact adhesive it is used to bond materials on to the following materials.

• Bonding KYDEX® thermoplastic sheet
• Aluminium sheeting
• Synthetic leather
• Bonding high pressure laminates
• Hard plastics
• Foams
• Fabrics
• GRP
• MDF
• Veneer
• Chipboard
• Plywood
• Countertops
• Cabinets
• Contours
• Doors
• Plywood
• Vinyl
• Rubber
• Veneer (Paperbacked)
• Veneer (Natural)
• Standard laminate
• Permanent bonding of materials where immediate bond strength, water and high heat resistance are required
• Other timber sheet materials

Coverage information for this spray glue

This contact adhesive can cover an area up to 80M² for the 22 litre pots to 375M² for the 100 litre glue canisters.

Spray adhesives are an essential tool for many industries, from automotive to construction to manufacturing. They allow for quick and efficient bonding of materials without the need for clamps or other traditional bonding methods. However, the use of chlorinated solvents in these adhesives has raised concerns about their impact on the environment and human health. Non-chlorinated dichloromethane-free spray adhesives offer a more sustainable alternative.

Chlorinated solvents health concerns

Spray adhesive manufacturers use chlorinated solvents, such as dichloromethane, widely to dissolve and bond a variety of materials. However, these solvents have been linked to a range of health and environmental issues. Exposure to dichloromethane can cause dizziness, headaches, and in high doses, even death. Chlorinated solvents, which contribute to the depletion of the ozone layer, are also potent greenhouse gases.

Chlorinated adhesives alternative

Non-chlorinated dichloromethane-free spray adhesives are an alternative that can provide the same bonding strength and versatility as their chlorinated counterparts, without the negative environmental and health impacts. These adhesives use different solvents, such as acetone or methyl ethyl ketone, to dissolve and bond materials. Although these solvents can have health and environmental impacts, they are generally considered less hazardous than dichloromethane.

Improved performance

In addition to their environmental and health benefits, non-chlorinated dichloromethane-free spray adhesives can also offer improved performance in certain applications. For instance, bonding materials that are sensitive to dichloromethane, such as polystyrene foam or certain plastics, can be better suited to these solvents. They can also have a longer open time, allowing for more precise application and repositioning of materials before the bond sets.

Are non-chlorinated dichloromethane free spray adhesives suitable for all applications?

No, non-chlorinated dichloromethane free spray adhesives may not be suitable for all applications. Some materials may require the strength and speed of bonding that only chlorinated solvents can provide.

What are non-chlorinated dichloromethane free spray adhesives?

Non-chlorinated dichloromethane free spray adhesives are a type of adhesive that uses solvents other than dichloromethane to dissolve and bond materials.

What are the benefits of using non-chlorinated dichloromethane free spray adhesives?

The main benefits of non-chlorinated dichloromethane-free spray adhesives are that they are more sustainable, environmentally friendly and less harmful to human health compared to traditional chlorinated solvent-based adhesives. They can also offer improved performance in certain applications and can be better suited for bonding sensitive materials.

What solvents are used in non-chlorinated dichloromethane free spray adhesives?

Non-chlorinated dichloromethane-free spray adhesives use solvents such as acetone or methyl ethyl ketone to dissolve and bond materials.

Overall

In conclusion, non-chlorinated dichloromethane-free spray adhesives offer a more sustainable alternative to traditional chlorinated solvent-based adhesives. They can provide similar bonding strength and versatility while avoiding the negative environmental and health impacts associated with dichloromethane. However, it is important to consider their use carefully and take appropriate safety measures to ensure safe handling and application.

Save when you buy in bulk

We offer bulk buying options with these sprayable glues. So the more you buy, the more you save.

Who are Pressure Sensitive Adhesive Solutions?

PSA Solutions Ltd, are: Non-chlorinated Spray Adhesive suppliers, based in Leicestershire, UK.

Our Leicester warehouse has a large range of spray glues ready to dispatch, usually within 1-3 days.

If you can not see the adhesive you are looking for contact our friendly sales team for free advice.

Where can I find out more?

To find out even more technical information about building insulation please see this Wikipedia page.