The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues

L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML

TensorGrip L22 is a 500ml aerosol spray can for permanent bonding of materials where immediate bond strength, water and high heat resistance are required. It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important Read the full product description

Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML

Additional product images

Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML

Buy in Bulk & Save

1 Can Only: £12.46
Excluding Tax: £10.38

Save with Bulk Buying Options
Prices shown below Exclude Tax

How many would you like?

View other sizes of this product

Credit Cards Paypal

PSA code: PSAL22A | Manufacturer: TensorGrip | Product condition: New | Stock status: In stock

Product datasheet View this product's datasheet

Ask us a question about this product
Get a bespoke quote for this product

Orders are dispatched within 1 - 2 working days

Open your account today for 5% off your 1st order

Free standard mainland UK shipping
on all orders over £30 (excluding VAT)

Free advice to make your products last longer


Variations of this product

DescriptionPrice
Image of L66 Solid Surface Compatible Spray Contact Adhesive / Glue Aerosol Can 500MLL66 Solid Surface Compatible Spray Contact Adhesive / Glue Aerosol Can 500ML
PSA Code: PSAL66
Buy in bulk and save
1 Can Only: £10.80
Excluding VAT (tax): £9.00
Image of L40 Contact Spray Adhesive / Glue Can - 500MLL40 Contact Spray Adhesive / Glue Can - 500ML
PSA Code: PSAL40B
Buy in bulk and save
1 Can Only: £5.70
Excluding VAT (tax): £4.75
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500MLL22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML
PSA Code: PSAL22A
Buy in bulk and save
1 Can Only: £12.46
Excluding VAT (tax): £10.38
Image of 22L H45 - KoolTherm Panel Spray Adhesive22L H45 - KoolTherm Panel Spray Adhesive
PSA Code: PSAH45
Buy in bulk and save
1 Can Only: £282.00
Excluding VAT (tax): £235.00
Image of 13.7 Litre C10 - Polyurethane Foam Spray Adhesive13.7 Litre C10 - Polyurethane Foam Spray Adhesive
PSA Code: PSAC10
Buy in bulk and save
1 Can Only: £169.32
Excluding VAT (tax): £141.10
Image of 22L L72 One Way Stick Urethane Spray Adhesive22L L72 One Way Stick Urethane Spray Adhesive
PSA Code: PSAL72
Buy in bulk and save
1 Can Only: £478.80
Excluding VAT (tax): £399.00
Image of H50 Hi Temp Polystyrene Spray Adhesive / Glue Canister 22L | 22KGH50 Hi Temp Polystyrene Spray Adhesive / Glue Canister 22L | 22KG
PSA Code: PSAH50
Buy in bulk and save
1 Can Only: £306.00
Excluding VAT (tax): £255.00
Image of 110L H45 - KoolTherm Panel Spray Adhesive110L H45 - KoolTherm Panel Spray Adhesive
PSA Code: PSAH45C
Buy in bulk and save
1 Can Only: £968.99
Excluding VAT (tax): £807.49
Image of L66 Solid Surface Compatible Spray Contact Adhesive / Glue 22 LitreL66 Solid Surface Compatible Spray Contact Adhesive / Glue 22 Litre
PSA Code: PSAL66
Buy in bulk and save
1 Can Only: £243.82
Excluding VAT (tax): £203.18
Image of TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 LitreTensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre
PSA Code: PSAL21
Buy in bulk and save
1 Can Only: £222.00
Excluding VAT (tax): £185.00
Image of TensorGrip L19 - High Performance Laminate & Edging Spray Canister Adhesive / Glue 22 LitreTensorGrip L19 - High Performance Laminate & Edging Spray Canister Adhesive / Glue 22 Litre
PSA Code: PSAL19
Buy in bulk and save
1 Can Only: £213.60
Excluding VAT (tax): £178.00
Image of 22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive
PSA Code: PSAH30
Buy in bulk and save
1 Can Only: £336.00
Excluding VAT (tax): £280.00
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 110L | 110KGL22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 110L | 110KG
PSA Code: PSAL22C
Buy in bulk and save
1 Can Only: £1,056.00
Excluding VAT (tax): £880.00
Image of Spray Adhesive Starter Kit - 22Kg TensorGrip L40 | 12FT Hose & Spray Glue GunSpray Adhesive Starter Kit - 22Kg TensorGrip L40 | 12FT Hose & Spray Glue Gun
PSA Code: PSA1001
Buy in bulk and save
1 Can Only: £270.00
Excluding VAT (tax): £225.00
Image of L40 Contact Spray Adhesive / Glue Pot - 22Litre | 22KGL40 Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
PSA Code: PSAL40
Buy in bulk and save
1 Can Only: £134.40
Excluding VAT (tax): £112.00
Image of TensorGrip L71 - Plasticiser Resistant Vinyl Spray Canister Adhesive / Glue 22 LitreTensorGrip L71 - Plasticiser Resistant Vinyl Spray Canister Adhesive / Glue 22 Litre
PSA Code: PSAL71
Buy in bulk and save
1 Can Only: £492.00
Excluding VAT (tax): £410.00
Image of L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KGL40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
PSA Code: PSAL40C
Buy in bulk and save
1 Can Only: £674.40
Excluding VAT (tax): £562.00
Image of L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KGL17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
PSA Code: PSAL17
Buy in bulk and save
1 Can Only: £234.00
Excluding VAT (tax): £195.00
Image of L17 Hi Temperature Resistant Contact Spray Adhesive / Glue Canister - 110 Litre | 110KGL17 Hi Temperature Resistant Contact Spray Adhesive / Glue Canister - 110 Litre | 110KG
PSA Code: PSAL17C
Buy in bulk and save
1 Can Only: £950.40
Excluding VAT (tax): £792.00
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KGL22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KG
PSA Code: PSAL22
Buy in bulk and save
1 Can Only: £222.00
Excluding VAT (tax): £185.00
Image of TensorGrip L61 - Platinum Web Spray Canister Contact Adhesive / Glue 22 LitreTensorGrip L61 - Platinum Web Spray Canister Contact Adhesive / Glue 22 Litre
PSA Code: PSAL61
Buy in bulk and save
1 Can Only: £271.90
Excluding VAT (tax): £226.58
Image of L40 Contact Spray Adhesive / Glue Can - 500MLL40 Contact Spray Adhesive / Glue Can - 500ML
PSA Code: PSAL40B
Buy in bulk and save
1 Can Only: £5.70
Excluding VAT (tax): £4.75
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500MLL22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML
PSA Code: PSAL22A
Buy in bulk and save
1 Can Only: £12.46
Excluding VAT (tax): £10.38
Image of L66 Solid Surface Compatible Spray Contact Adhesive / Glue Aerosol Can 500MLL66 Solid Surface Compatible Spray Contact Adhesive / Glue Aerosol Can 500ML
PSA Code: PSAL66
Buy in bulk and save
1 Can Only: £10.80
Excluding VAT (tax): £9.00
Image of Spray Adhesive Applicator RollerSpray Adhesive Applicator Roller
PSA Code: PSA4106
1 Roller Only: £47.99
Excluding VAT (tax): £39.99
Image of Spray Adhesive Spray Gun & HoseSpray Adhesive Spray Gun & Hose
PSA Code: PSA0015
1 Gun Only: £142.80
Excluding VAT (tax): £119.00
Image of Spray Gun - Professional 6501 TipSpray Gun - Professional 6501 Tip
PSA Code: PSA0017
1 Gun Only: £142.80
Excluding VAT (tax): £119.00
Image of Spray Gun - Professional Long Wand Q-TipSpray Gun - Professional Long Wand Q-Tip
PSA Code: PSA0007
1 Gun Only: £178.80
Excluding VAT (tax): £149.00
Image of Spray Adhesive Gun HoseSpray Adhesive Gun Hose
PSA Code: PSA0018
1 Hose Only: £59.99
Excluding VAT (tax): £49.99
Image of Spray Adhesive Starter Kit - 22Kg TensorGrip L40 | 12FT Hose & Spray Glue GunSpray Adhesive Starter Kit - 22Kg TensorGrip L40 | 12FT Hose & Spray Glue Gun
PSA Code: PSA1001
1 Kit Only: £270.00
Excluding VAT (tax): £225.00

TensorGrip L22 is a 500ML for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required.

It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.

This spray adhesive is Low VOC California Compliant.


Spray adhesive consistancy

This consistancy of this contact adhesive is web like.


Spray adhesive uses information

When it comes to this contact adhesive it can be used to bond materials on to the following materials.

  • Standard laminate
  • Aluminium sheeting
  • Synthetic leather
  • HPL
  • Hard plastics
  • GRP
  • Foams and fabrics to a variety of substrates including:
    MDF
    Chipboard
    Plywood
    Many other timber sheet materials

Coverage information for this spray glue

This contact adhesive can cover an area up to 4M2.

Advantages of using L22

L22 has a number of advantages. Some of these are:

  • Fast Drying
  • Good Heat Resistance
  • Very High Solids
  • Non-Chlorinated Adhesive


Save when you buy in bulk

We offer bulk buying options with this sprayable glue. So the more you buy, the more you save.


Technical information

PropertyValue

All the information is based on practical experience and is published in good faith. However, because we have no control over the manner or conditions in which our products are used, or over work undertaken or end product manufactured by the purchaser, we cannot accept liability for results.

Responsibility for ascertaining the suitability of products for his purposes rests with the purchaser.

All conditions, representations, statements, warranties or guarantees whatsoever, whether express, implied or statutory, in respect of any goods manufactured, sold or supplied by us are hereby expressly excluded and we accept no liability in respect of any claim for damage or consequential loss caused to any property arising directly or indirectly out of the use of our products or goods.

Viscosity350 cps 25C sp#2
Total Solids34%
ColourClear or Red
System FlammabilityFlammable adhesive in flammable propellant
Shear> 250 p.s.i.
Tensile (180 Peel)> 25 p.s.i.
90 Peel (6.25 sq.cm)> 25 p.s.i.
Shear adhesion failure temp. (SAFT) 100gram> 115C
Heat resistance (25mm / 100gram)120C
Dry time2-3 minutes dependant on temprature & humidity
Open time30 minutes


10 reasons to use this Hi Temperature Resistant Web Contact Spray Adhesive

10 reason to use this spray glue include:

  1. Fast Application - Speed up your production thanks to its rapid application rate
  2. Airless - Reduce your power usage and save money in the process courtesy of its airless system
  3. Adjustable Spray Pattern - considering there is no overspray, wastage is reduced dramatically
  4. Fully Portable - the L22's portability means it's incredibly easy to use onsite
  5. Non-Flammable Adhesive - given that it's non-flammable, L22 is safer to use and safer to store
  6. Eco Friendly - once youre finished with the adhesive, the canister is completely recyclable
  7. High-Temperature Resistance - L22 can resist temperatures up to 125C
  8. Very High Solids - benefit from high yield and coverage of up to 175m2
  9. Low Maintenance - Don't waste time cleaning, as L22 is extremely low maintenance, helping to reduce downtime
  10. Saves Time and Money

Contact canister storage and canister change over instructions

To change over the canister turn the valve on the canister into the off position, then spray out any remaining adhesive left in the hose.

Next, disconnect the spray hose and gun from the canister.

Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear - which indicates that the hose and gun are clean.

If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open, and do not disconnect the hose & gun from the canister.

Close and lock the spray gun.


Handling & Storage Information

  • Consult Material Safety Data Sheet prior to use
  • DO NOT store at temperatures over 50C
  • Avoid exposure to direct sunlight
  • DO NOT store directly on a concrete floor
  • For optimum performance, store at 18C during use; but, it must always be above 10C
  • When connected, keep the valve open and hose pressurised at all times
  • DO NOT close the valve until ready to connect to new cylinder
  • Release pressure in hose before disconnection
  • Always test product to determine suitability for your particular application prior to use in production

How to use this contact spray adhesive

This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60F - 80F (16C - 27C).

Use with adequate ventilation, and when possible we recommend shaking the canister well before using.

Attach and secure the hose tightly onto the spray gun with required tip, and attach the other end of the hose onto the canister.

Make sure the hose-valve connections are securely tight, and then open the valve on the canister slowly and fully, checking for leaks during this process. Then once open unlock the trigger on the spray gun to start spraying. It is as simple as that.

Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.


Spraying recomendations

  1. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc...
  2. Spray about 10-20 cm (4" 8") away at a 90 angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
  3. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
  4. Allow 2 - 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
  5. Adhere surfaces and press together with adequate pressure.
  6. roller is recommended to apply a uniform pressure to achieve maximum strength.
  7. Allow 24 hours for the adhesive to fully cure.
  8. If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice

Not sure if this spray adhesive is right for you?

If you are not sure if this contact adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.


Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.


Shipping Information

PSA Solutions offers the following shipping options:

  • Mainland UK shipping for orders over £30 (excluding VAT) is free
  • Mainland UK shipping for orders under £30 (excluding VAT) is only: £4.99
  • Signed for - up to 3 working days is only: £5.99
  • Next day delivery - when ordered before 12pm is only: £11.99
  • Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
  • Europe starts from only: £22.20
  • US, China, Middle East & South East Asia only: £43.78
  • Rest of the world from only: £61.58

Returns Information

If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.


Product Questions

    Product questions for our: (A different size of this product)

    • What is the coverage of your 17.5kg contact adhesive - Live Chat
    • Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
    • MDF to Laminate - Live Chat
    • If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
    • Thanks - Live Chat

    Product questions for our: Discontinued: 17KG Tuskbond ONE Spray Adhesive (A different size of this product)

    • Hi, We are currently working in Holland and using contact adhesive to fit plastic wall panels to both concrete and Plasterboard walls. We have approx 450 m2. Can you please advise what would be best to use for your selection. We would require the spray gun also. Thanks in advance - Martin.
    • Hi Martin, this product will be ideal for what you require - Ian, Product Support Manager
    • Hi, We need to stick some acoustic timber panels that weigh approx 3kg each to a painted wall, would this product be suitable to fix them? Thanks Richard
    • Hi Richard, yes this will be ideal for your application - Ian, Product Support Manager

    Product questions for our: L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KG (A different size of this product)

    • Dear sir/madam, I hope my message finds you well. I am about to start a project where I need to glue some small pieces of plastic into a sheet of fabric. Now the small plastics are sitting together in a piece of tulle and I will jist glue them as they are onto the fabric. I just wanted to ask if you have any kind of adhesive that may be suitable for me in this case. I saw the L22 Non-Mecl Fine Web Spray Adhesive that mey fit my needs but any professional advice will be well received. Thank you in advance. Mr. Margarit
    • Hello Margarit, and thank-you for your enquiry. The L22 would certainly suit your application, on the basis the plastic not too conformable, as this could signify a higher content of plasticisers. These could react with the glue. On that basis, L22 would be the way to go - Best Regards Matt, Product Support Manager