The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
Product Videos
Product description
See our Starter Kit if you require the hose & gun for this pot?
This spray adhesive starter kit comes with everything you need to get up and running quickly. The 22KG TensorGrip® L40 Spray Adhesive, a 12FT Spray Adhesive Glue Hose, and the Spray Glue Gun.
Product description
As part of our HVAC & Insulation spray adhesive range, H45 is a California web spray adhesive suitable for insulation and metal sheeting bonding applications.
H45 - KoolTherm Panel Spray Adhesive is an industry-leading adhesive solution that delivers exceptional performance and ease of use. Specially designed for bonding KoolTherm insulation panels, it ensures long-lasting adhesion in a range of conditions and applications.
Approved by Kingspan®
Approved by KINGSPAN® for bonding KoolTherm Insulation Panels.
TensorGrip® H45 has been developed to create high-performance bonds between KINGSPAN® KoolTherm Insulation Panels and metal ductwork or any other substrate in which KoolTherm is to be used.
This spray adhesive has very high tack, enabling users to bond KoolTherm successfully in the most demanding applications in which this type of insulation panel is used. Although the H45 has a very tacky nature, when the adhesive is cured, the bond line is extremely resilient and tough, ensuring lifelong performance.
The H45 sprays in a consistent web spray pattern, which is highly controllable when using the professional spray gun along with the Lechler tip.
Application Uses
H45 KoolTherm Panel HVAC & Insulation spray adhesive is designed for securing insulation panels in HVAC systems and other insulation applications. It's a specialised adhesive that offers strong, durable bonding for a variety of insulation materials, ensuring energy efficiency and robust performance in heating, ventilation, and air conditioning systems.
Securing Insulation to Ductwork
Ideal for attaching insulation panels to the exterior of HVAC ducts to improve energy efficiency and reduce heat loss.
Attaching Insulation Panels in HVAC Systems
They are used to adhere to insulation within HVAC systems to ensure optimal thermal performance and noise reduction.
Roof Insulation
Effective for bonding insulation materials to roofing systems, helping to maintain consistent indoor temperatures and reduce energy costs.
Wall Insulation
Suitable for attaching rigid foam insulation panels to walls in both residential and commercial buildings to enhance thermal efficiency.
Underfloor Insulation
It can be used to secure insulation boards beneath floor surfaces to prevent heat loss, especially in buildings with raised foundations.
Fixing Insulation to Metal Frames
Excellent for attaching insulation materials to metal framing structures within buildings, ensuring a tight and durable bond.
Ceiling Insulation Applications
Ideal for applying insulation panels to ceilings to help reduce heat transfer between floors and improve overall energy efficiency.
Outdoor Insulation Projects
Due to its strong adhesive properties, it can be used for exterior insulation projects, including outdoor HVAC equipment.
Insulating Prefabricated Panels
Useful in the prefabrication process of panels for quick and efficient construction, where insulation needs to be firmly bonded to panels before installation.
Special Projects Requiring Thermal Insulation
Can be applied in specialised areas such as cold storage rooms, refrigerated vehicles, or anywhere requiring robust thermal insulation and a strong adhesive bond.
Quick Drying
This solvent-based, quick-drying adhesive is packaged in an easy-to-use spray can for even and controlled application. The H45 adhesive features superior tack and high initial grab, reducing the need for support during installation and enabling quicker job completion.
Designed for
This spray adhesive has been designed for:
- Insulation
- Metal / Aluminium Sheeting
Environmentally Friendly
Additionally, the H45 KoolTherm Panel Spray Adhesive is designed with the environment in mind. Despite its robust performance, it has low VOC emissions and complies with all relevant safety and environmental regulations.
Reduced Overspray
User safety is of paramount importance to us. Hence, the adhesive is equipped with a specially designed nozzle that reduces overspray, helping to minimise waste and keep the application area clean.
High coverage
The adhesive formulation boasts high coverage and exceptional strength, enabling it to bond not only insulation panels but a wide range of construction materials, including concrete, brickwork, metals, and more. This makes the H45 an indispensable tool for both residential and commercial construction projects.
Canister Evacuation and Render Safe Procedure
Please use the following information when getting rid of an empty canister.
NOTE - Always direct the valve outlet away from the person during the following procedures
Step A. EVACUATION
- Ascertain from weight of canister whether empty of liquid residues
- If liquid residue is remaining, invert the canister and open the valve a minimal amount to allow gradual pressure release, leaving it inverted until all pressure is released. Once pressure appears to be released, keeping it inverted, gradually open the valve fully to ensure no blockage has occurred in the valve, and ascertain evacuation is complete.
- If empty of liquid, invert the canister and fully open the valve to release pressure, and ascertain evacuation is complete.
- Once empty then, proceed to part B to puncture them.
Step B. RENDER SAFE PUNCTURING
- Check, by feel, whether the canister contains liquid residues. If yes, take additional care to avoid spillage during the following operations.
- Place evacuated canister in fly press jaws. Base end forward.
- Close operator protective guard. The wind chisel points down until the canister is fully pierced, then up to release. Remove the canister from the fly press.
- Alternatively, using a nail punch, puncture the bung on the canister neck (see image below)
- If the canister contains liquid residues and is still pressurised, pierce the canister twice and then empty it into the appropriate bulk waste liquid container.
- Disposal via waste recycling provider.
What is the H45 - KoolTherm Panel Spray Adhesive?
The H45 - KoolTherm Panel Spray Adhesive is a superior-grade, solvent-based adhesive specially designed for bonding KoolTherm insulation panels. Its high initial grab and muscular bond strength make it an excellent choice for both professional and DIY applications.
On what surfaces can I use the H45 - KoolTherm Panel Spray Adhesive?
The H45 adhesive is versatile and can bond to various construction materials such as concrete, brickwork, metals, and, of course, KoolTherm insulation panels.
How do I apply the H45 - KoolTherm Panel Spray Adhesive?
The product comes in a convenient spray can for easy application. Ensure the surface is clean and dry before applying the adhesive. After shaking the can, spray a consistent layer of glue onto both surfaces to be bonded and wait a few moments for it to become tacky. Press the surfaces together firmly to ensure a strong bond.
How long does it take for the adhesive to dry?
The H45 - KoolTherm Panel Spray Adhesive is quick-drying. However, complete cure time can vary depending on environmental conditions and the materials being bonded. Always refer to the product instructions for specific drying times.
What safety measures should I take when using the H45 - KoolTherm Panel Spray Adhesive?
It's essential to use the H45 adhesive in a well-ventilated area and wear appropriate protective equipment, such as gloves and safety glasses. Avoid contact with skin and eyes, and keep the product out of reach of children. Always refer to the safety instructions on the product label.
Is the H45 - KoolTherm Panel Spray Adhesive environmentally friendly?
Yes, the H45 adhesive is designed with the environment in mind. It has low VOC emissions and complies with all relevant safety and environmental regulations.
What should I do if there's overspray or adhesive in areas I don't want it?
The H45 adhesive comes with a specially designed nozzle that helps reduce overspray. However, if accidental overspray does occur, clean up as soon as possible using a cloth and appropriate cleaning agent, ensuring you follow safety guidelines. If the adhesive has dried, mechanical removal may be necessary.
Features
- Fast Drying
- Good Heat Resistance
- Very High Solids
- Portable Systems
- Non-Chlorinated Adhesive
- Easy Application Control
- Low VOC
- CO-REZ
- Web Spray
- California compliant
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- Do Not store at temperatures over 50°C
- Avoid exposure to direct sunlight
- Do Not store directly on concrete floor
- For optimum performance, store at 18°C during use, but must always be above 10°C
- When connected, keep the valve open and the hose pressurised at all times
- Do Not close the valve until it is ready to connect to the new cylinder
- Release pressure in hose before disconnection
- Always test product to determine suitability for your particular application prior to use in production
Directions to use
This product is designed to be applied to two surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results, the the temperature of the adhesive and the surfaces being bonded should be between 60 degrees F - 80 degrees F (16 degrees C - 27 degrees C).
Use with adequate ventilation. When possible we recommend shaking the canister well before using. Attach and secure the hose tightly onto the spray gun with the required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, and check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
Prior to use, Check compatibility by spraying a small A test patch of the adhesive is on the substrate. This product may degrade some substrates. Spray about 10-20 cm (4 inches - 8 inches) away at a 90-degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice.
Canister Storage / Change Over
Turn the valve on the canister into the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister. Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until the liquid is clear which indicates that the hose and gun are clean. If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
Special Precautions
For optimum results, store the canister above 18°C during use, but it must always be above 10°C. Allow substrates to acclimatise to normal room temperature (18°C) for 48 hours before bonding. Do not exceed the open time of the adhesive. Keep the canister off cold concrete floors during use. If adhesive is expelled wet or as a jet, the canister is too cold - move to a warm environment and allow to thoroughly acclimatise before reusing.
CAUTION
- Use only in well ventilated areas
- DO NOT thin or reactivate with solvents
- DO NOT incinerate
- DO NOT expose to extreme heat over 50°C
- Keep away from sources of ignition
- Release pressure before disconnecting hose
- Test for suitability before use
MSDS and Technical Data Sheets MUST be read and understood before use. Information contained in this technical literature is believed to be accurate and offered in good faith for the benefit of the consumer. The company, however, cannot assume any liability or risk involved in the use of its chemical products since the conditions of use are beyond our control. Statements concerning the possible use of our products are not intended as recommendations to infringe on any patent.
Technical information
| Property | Value |
|---|---|
| Viscosity | 350 cps 25°C sp#2 |
| Total Solids | 28%-30% |
| Colour | Clear or red |
| System Flammability | Flammable adhesive in a flammable propellant |
| Shear adhesion failure temp | Heat resistance (25mm/100gram - 105°C) |
| 90° Peel (6.25 sq.cm) | > 25 P.S.I |
| Dry time | 2-5 mins dependant on temp & humidity |
Disclaimer
The technical data contained herein is based on our present knowledge and experience. We cannot be held liable for any errors, inaccuracies, omissions or editorial failings that result from technological changes or research between the date of issue of this document and the date the product is acquired. Before using the product, the user should carry out any necessary tests in order to ensure that the product is suitable for the intended application.
Moreover, all users should contact the seller or the manufacturer of the product for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product. Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and in accordance with the stipulations set out in our general sales conditions.
The information detailed in the present technical data sheet is given by way of indication and needs to be more exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer.
Not sure if this spray adhesive is right for you?
If you are not sure if this contact adhesive tape is right for your individual requirements, please do not hesitate to Contact our friendly sales team, and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Shipping Information
PSA Solutions offers the following shipping options:
- Mainland UK shipping for orders over £30 (excluding VAT, Glue Pots, and shipping) is free
- Mainland UK shipping for orders under £30 (excluding VAT, Glue pots and shipping) is only: £6.75
- Signed for - up to 3 working days is from only: £6.75
- Next day delivery - when ordered before 12pm is from only: £11.99
- Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
- Europe starts from only: £22.20
- US, China, Middle East & South East Asia only: £43.78
- Rest of the world from only: £61.58
Returns Information
If your goods are damaged in transit or deemed faulty due to factors beyond our control, we will advise you to return them. If you do not require replacement goods to be dispatched to you, we may offer a full refund. We provide this Returns Information to inform you of your responsibilities in the event of damaged or faulty goods. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. Checking the goods in the presence of the courier and noting any damages when signing is your responsibility. Alternatively, just a signature will confirm that you have received the goods in good order, and we may not consider refunds thereafter.
Product Questions
Product questions for our: Tuskbond One Contact Spray Adhesive (A different size of this product)
- Hi, Is the spray ideal for bonding foam together also is it ideal for bonding foam to wood Thank You David.
- Hi David, Yes both applications would be fine. Be sure to apply a layer of adhesive to both surfaces and then bring them together and apply pressure as the adhesive layers start to skin over - Ian, Product Support Manager
- we use acoustic panels made from semi rigid fibreglass and which to stick them to walls usually painted will this work and to what temperature? - Peter
- Hi Peter, Yes this should be fine, as long as you spray both surfaces and allow the adhesive to start skinning before bringing the surfaces together. This will withstand temperatures up to about 70�C. - Ian, Product Support Manager
- Hi Is this good to stick vinyl paper backed borders to painted walls? Is this a standalone can or would i need a gun to go with it? - Mark
- Hi Mark, Thank you for your enquiry. I would not recommend our Tuskbond adhesive for this application due to the solid content in the adhesive! This could possible result in an uneven surface once dry and may cause your border to discolour after a period of time. Our recommendation would be to use standard wallpaper paste - Ian, Product Support Manager
- Hi, I am looking for some spray contact adhesive to stick laminate to MDF. Normally I would use tuskbond canisters with a spray gun but as I am working on this as a small project rather than for work, I don't have the budget to buy the gun and 22l canister. what sprays can you recommend to get the job done? Thanks Sofia
- Hi Sofia, this product will be my recommendation for what you require - Ian, Product Support Manager
- I am looking at your Tuskbond heat resistant spray adhesive and you advertise it as Class 1 approved. Is this the highest fire rated spray adhesive you have or do you have others? - Julia (Live Chat)
- This is the highest we have currently julia. What is your application Julia? - Ian, Product Support Manager
- I want to glue fire rated fabric onto fire rated card. Do you have a certificate for this product to say it is compliant with Class 1? - Julia (Live Chat)
- Leave me your email address and i will get the tech info over to you this afternoon - Ian, Product Support Manager
Product questions for our: (A different size of this product)
- What is the coverage of your 17.5kg contact adhesive - Live Chat
- Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
- MDF to Laminate - Live Chat
- If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
- Thanks - Live Chat
Similar Products
Tuskbond One Contact Spray Adhesive
Spray Adhesive Starter Kit - 17.5KG TensorGrip L40 | 12FT Hose & Spray Glue Gun
22L L72 One Way Stick Urethane Spray Adhesive
22L H45 - KoolTherm Panel Spray Adhesive
22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive
L40 Contact Spray Adhesive / Glue Can
H50 Hi Temp Polystyrene Spray Adhesive / Glue Canister 22L | 17.5KG
L22 Non-Mecl Fine Web Spray Adhesive / Glue
110L H45 - KoolTherm Panel Spray Adhesive
L66 Solid Surface Compatible Spray Contact Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre
TensorGrip L19 - High Performance Laminate & Edging Spray Pot Adhesive / Glue 22 Litre
TensorGrip LP61 - Platinum Web Spray Canister Contact Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 110 Litre
L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue - Class 1 Fire Rated
LP64 Platinum Mist Spray Contact Adhesive
C101 Citrus Adhesive Cleaner Spray
L44 DCM Free Contact Spray Adhesive / Glue Spray Pot - 22Litre | 17.5KG
Tuskbond XPRO Contact Adhesive 500ml Aerosol Spray Glue Can
Tuskbond XPRO Contact Adhesive Aerosol Spray Glue Pot 22 Litre
Reviews for this product from confirmed past customers
To qualify to be added below, the reviewer must have purchased this product from us.
Peter
Its a great product, delivered promptly. Entirely satisfied!
The following reviews are from other sizes of this product
Product reviews for our: Tuskbond One Contact Spray Adhesive (A different size of this product)
Peter
Its a great product, delivered promptly. Entirely satisfied!
Product reviews for our: Spray Adhesive Starter Kit - 17.5KG TensorGrip L40 | 12FT Hose & Spray Glue Gun (A different size of this product)
James Madden
Great product 5 Sent from my iPhone
Martin
Was doubtful when finding the product online. I wanted an easier option than Evo Stik cans that you spread on. The guy I spoke to ran through what i needed. The packaging was not that good but product not damaged. I must say for bonding Formica to birch ply it’s absolutely brilliant. Spray pattern is very accurate and no waste and more importantly no sticky hands. I would 100% recommend this product. Also it works out cheaper than evo stick Kindest regards