The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
TensorGrip® LP61 is suitable for bonding HPL, veneers and almost all other decorative face laminates to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials, as well as plastic, aluminium sheeting, and synthetic leathers. This unique formulation is designed for permanent and LIFETIME GUARANTEED bonding of materials where high grab and superior bond strength are required.
Spray adhesive benefits
When it comes to this contact adhesive it has the following benefits.
- CLASS-0 Fire Rating
- Easy application control
- Fast Flash off Time
- Non-Chlorinated Adhesive - making this a healthy adhesive
- High Temp Resistance - 128°C
- Minimal Cleaning
Spray adhesive consistancy
This consistancy of this contact adhesive is fine consistant web like spray pattern.
Spray adhesive uses information
When it comes to this contact adhesive it can be used to bond materials on to the following materials.
- Bonding HPLs (High Pressure Laminates)
- Aluminium sheeting
- Synthetic leathers
- Standard laminates
- Decorative face laminates to DF, chipboard, plywood and many other timber sheet materials
- Other similar uses
Coverage information for this spray glue
This contact adhesive can cover an area up to 75M2.
|Viscosity||350 cps 25°C sp#2, 30r.p.m.|
|System Flammability||Flammable adhesive in flammable propellant|
|Shear||> 250 p.s.i|
|Tensile (180° Peel)||> 25 p.s.i.|
|Shear adhesion failure temp. (SAFT) 100gram||> 128°C|
|Heat resistance (25mm/100gram)||115°C|
|Open time||40 minutes|
Contact canister storage and canister change over instructions
Turn valve on canister into the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister.
Close and lock the spray gun.
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- DO NOT store at temperatures over 50°C
- Avoid exposure to direct sunlight
- DO NOT store directly on a concrete floor
- For optimum performance, store at 18°C during use; but, it must always be above 10°C
- When connected, keep the valve open and hose pressurised at all times
- DO NOT close the valve until ready to connect to new cylinder
- Release pressure in hose before disconnection
- Always test product to determine suitability for your particular application prior to use in production
How to use this contact spray adhesive
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F - 80°F (16°C - 27°C).
Use with adequate ventilation, and when possible we recommend shaking the canister well before using.
Then start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.
- Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc...
- Spray about 10-20 cm (4" – 8") away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
- Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
- Allow 2 - 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
- Adhere surfaces and press together with adequate pressure.
- roller is recommended to apply a uniform pressure to achieve maximum strength.
- Allow 24 hours for the adhesive to fully cure.
- If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Not sure if this spray adhesive is right for you?
If you are not sure if this contact adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
- Mainland UK shipping for orders over £30 (excluding VAT) is free
- Mainland UK shipping for orders under £30 (excluding VAT) is only: £5.99
- Signed for - up to 3 working days is from only: £5.99
- Next day delivery - when ordered before 12pm is from only: £11.99
- Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
- Europe starts from only: £22.20
- US, China, Middle East & South East Asia only: £43.78
- Rest of the world from only: £61.58
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
Product questions for our: Tuskbond Contact Spray Adhesive 500ml Snagging Cans (A different size of this product)
- Hi, Is the spray ideal for bonding foam together also is it ideal for bonding foam to wood Thank You David.
- Hi David, Yes both applications would be fine. Be sure to apply a layer of adhesive to both surfaces and then bring them together and apply pressure as the adhesive layers start to skin over - Ian, Product Support Manager
- we use acoustic panels made from semi rigid fibreglass and which to stick them to walls usually painted will this work and to what temperature? - Peter
- Hi Peter, Yes this should be fine, as long as you spray both surfaces and allow the adhesive to start skinning before bringing the surfaces together. This will withstand temperatures up to about 70°C. - Ian, Product Support Manager
- Hi Is this good to stick vinyl paper backed borders to painted walls? Is this a standalone can or would i need a gun to go with it? - Mark
- Hi Mark, Thank you for your enquiry. I would not recommend our Tuskbond adhesive for this application due to the solid content in the adhesive! This could possible result in an uneven surface once dry and may cause your border to discolour after a period of time. Our recommendation would be to use standard wallpaper paste - Ian, Product Support Manager
- Hi, I am looking for some spray contact adhesive to stick laminate to MDF. Normally I would use tuskbond canisters with a spray gun but as I am working on this as a small project rather than for work, I don't have the budget to buy the gun and 22l canister. what sprays can you recommend to get the job done? Thanks Sofia
- Hi Sofia, this product will be my recommendation for what you require - Ian, Product Support Manager
- I am looking at your Tuskbond heat resistant spray adhesive and you advertise it as Class 1 approved. Is this the highest fire rated spray adhesive you have or do you have others? - Julia (Live Chat)
- This is the highest we have currently julia. What is your application Julia? - Ian, Product Support Manager
- I want to glue fire rated fabric onto fire rated card. Do you have a certificate for this product to say it is compliant with Class 1? - Julia (Live Chat)
- Leave me your email address and i will get the tech info over to you this afternoon - Ian, Product Support Manager
Product questions for our: (A different size of this product)
- What is the coverage of your 17.5kg contact adhesive - Live Chat
- Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
- MDF to Laminate - Live Chat
- If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
- Thanks - Live Chat
Product questions for our: 17KG Tuskbond ONE Spray Adhesive (A different size of this product)
- Hi, We are currently working in Holland and using contact adhesive to fit plastic wall panels to both concrete and Plasterboard walls. We have approx 450 m2. Can you please advise what would be best to use for your selection. We would require the spray gun also. Thanks in advance - Martin.
- Hi Martin, this product will be ideal for what you require - Ian, Product Support Manager
- Hi, We need to stick some acoustic timber panels that weigh approx 3kg each to a painted wall, would this product be suitable to fix them? Thanks Richard
- Hi Richard, yes this will be ideal for your application - Ian, Product Support Manager
Product questions for our: L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 17.5KG (A different size of this product)
- Dear sir/madam, I hope my message finds you well. I am about to start a project where I need to glue some small pieces of plastic into a sheet of fabric. Now the small plastics are sitting together in a piece of tulle and I will jist glue them as they are onto the fabric. I just wanted to ask if you have any kind of adhesive that may be suitable for me in this case. I saw the L22 Non-Mecl Fine Web Spray Adhesive that mey fit my needs but any professional advice will be well received. Thank you in advance. Mr. Margarit
- Hello Margarit, and thank-you for your enquiry. The L22 would certainly suit your application, on the basis the plastic not too conformable, as this could signify a higher content of plasticisers. These could react with the glue. On that basis, L22 would be the way to go - Best Regards Matt, Product Support Manager
Reviews for this product from confirmed past customers
To qualify to be added below, the reviewer must have purchased this product from us.
The following reviews are from other sizes of this product
Product reviews for our: Tuskbond Contact Spray Adhesive 500ml Snagging Cans (A different size of this product)
Its a great product, delivered promptly. Entirely satisfied!
Product reviews for our: Spray Adhesive Starter Kit - 17.5KG TensorGrip L40 | 12FT Hose & Spray Glue Gun (A different size of this product)
Great product 5 Sent from my iPhone
Product reviews for our: L40 Contact Spray Adhesive / Glue Spray Pot - 22Litre | 17.5KG (A different size of this product)
EXCELLENT service and product at the best price I could find
Product reviews for our: L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 17.5KG - Class 1 Fire Rated (A different size of this product)
Hell of a good product, we fit white panel cladding , just going to order another cylinder. Love to be able to return the empty cylinders.