Call us for advice - or just to place an order on: 0116 286 5141
The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
TensorGrip® F11 is ideal for bonding Commonly used substrates found within the foam and upholstery industry, Foam, Vinyl, Rubber, Leathers, Plastics. In the past, this was not possible because of the leaching plasticisers migrating from the vinyls causing delamination. F11 is unique due to its capability to bond foams and fabric single-sided when in conjunction with nip rollers.This contact adhesive can cover an area up to 80M2 Read the full product description
This item qualifies for free Mainland UK shipping
Buy in Bulk & Save
1 Canister Only: £327.40Excluding Tax: £272.83
Save with Bulk Buying OptionsPrices shown below Exclude Tax1 Canister = £272.83 / Canister3 Canisters - £251.64 / Canister = £754.92 (Save: 7.77% - £63.57)
How many would you like?
Add to your basket »
PSA code: PSAF11 | Manufacturer: TensorGrip | Product condition: New | Stock status: In stock
View this product's datasheet
Ask us a question about this productGet a bespoke quote for this product
Orders are dispatched within 1 - 2 working days
Open your account today for 5% off your 1st order
Free standard mainland UK shippingon all orders over £30 (excluding VAT)
Free advice to make your products last longer
TensorGrip® F11 is a NON-MECL LOW VOC is a revolutionary, high-performance plasticiser resistant adhesive, specially
formulated to bond all commonly used substrates found within the foam and upholstery industry. The F11 will bond vinyl,
rubber, leathers and plastics, as in the past this was not possible because of the leeching plasticisers migrating from the
vinyl’s causing delamination. F11 is unique due to its capability to bond foams and fabric single-sided when in conjunction
with nip rollers
When it comes to this contact adhesive it can be used to bond materials on to the following materials.
This consistancy of this contact adhesive is fine consistant web like spray pattern.
This contact adhesive can cover an area up to 80M2.
We offer bulk buying options with this sprayable glue. So the more you buy, the more you save.
Turn valve on canister into the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister.
Close and lock the spray gun.
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F - 80°F (16°C - 27°C).
Use with adequate ventilation, and when possible we recommend shaking the canister well before using.
Then start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.
If you are not sure if this contact adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
13.7 Litre C10 - Polyurethane Foam Spray Adhesive
22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive
F40 Glue - Aggressive Tack Spray Contact Adhesive Pot 22 Litre | 22KG
L40 Contact Spray Adhesive / Glue Spray Pot - 22Litre | 22KG
L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
F40 - Aggressive Tack Spray Contact Adhesive Canister 110 Litre | 110KG
L40 Contact Spray Adhesive / Glue Can - 500ML
F55 Fast Dry Non Mecl Foam Spray Adhesive / Glue Canister 22 Litre | 22KG
TensorGrip F11 - Non-Mecl Foam Bonding Spray Canister Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 110 Litre