Call us for advice - or just to place an order on: 0116 2865141
The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
TensorGrip® F55 is a 22L / 22Kg fast dry pot of, NON-MECL adhesive. This spray adhesive is suitable for high demanding applications for foam, MDF, Plywood, Synthetic leather, fabric and upholstery applications.This contact adhesive can cover an area up to 4M2 Read the full product description
Buy in Bulk & Save
1 Can Only: £12.18Excluding Tax: £10.15
Save with Bulk Buying OptionsPrices shown below Exclude Tax1 Can = £10.15 / Can12 Cans - £9.19 / Can = £110.28 (Save: 9.46% - £11.52)24 Cans - £8.63 / Can = £207.12 (Save: 14.98% - £36.48)
How many would you like?
Add to your basket »
PSA code: PSAF55A | Manufacturer: TensorGrip | Product condition: New | Stock status: In stock
View this product's datasheet
Ask us a question about this productGet a bespoke quote for this product
Orders are dispatched within 1 - 2 working days
Open your account today for 5% off your 1st order
Free standard mainland UK shippingon all orders over £30 (excluding VAT)
Free advice to make your products last longer
This spray adhesive starter kit comes with everything you need to get up and running quickly. The 22KG TensorGrip® L40 Spray Adhesive, a 12FT Spray Adhesive Glue Hose, and the Spray Glue Gun.
TensorGrip® F55 is a 22L / 22Kg fast dry pot of, NON-MECL adhesive. This spray adhesive is suitable for high demanding applications for foam, fabric and upholstery applications.
The unique glue formula in this spray pot blends the benefits of non chlorinated technology with a fast flash off time for ultimate user safety and efficiency.
F55 has been designed with a tough cure glue line, making it perfectly suited to high demand curved bonding applications where fast grab is essential.
When it comes to this contact adhesive it can be used to bond materials on to the following materials.
This consistancy of this contact adhesive is fine web like pattern.
This contact adhesive can cover an area up to 4M2.
F55 has a number of advantages. Some of these are:
We offer bulk buying options with this sprayable glue. So the more you buy, the more you save.
All the information is based on practical experience and is published in good faith. However, because we have no control over the manner or conditions in which our products are used, or over work undertaken or end product manufactured by the purchaser, we cannot accept liability for results.
Responsibility for ascertaining the suitability of products for his purposes rests with the purchaser.
To change over the canister turn the valve on the canister into the off position, then spray out any remaining adhesive left in the hose.
Next, disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear - which indicates that the hose and gun are clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open, and do not disconnect the hose & gun from the canister.
Close and lock the spray gun.
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F - 80°F (16°C - 27°C).
Use with adequate ventilation, and when possible we recommend shaking the canister well before using.
Attach and secure the hose tightly onto the spray gun with required tip, and attach the other end of the hose onto the canister.
Make sure the hose-valve connections are securely tight, and then open the valve on the canister slowly and fully, checking for leaks during this process. Then once open unlock the trigger on the spray gun to start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.
If you are not sure if this contact adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
Spray Adhesive Starter Kit - 22Kg TensorGrip L40 | 12FT Hose & Spray Glue Gun
F40 Glue - Aggressive Tack Spray Contact Adhesive Pot 22 Litre | 22KG
L40 Contact Spray Adhesive / Glue Spray Pot - 22Litre | 22KG
L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
F40 - Aggressive Tack Spray Contact Adhesive Canister 110 Litre | 110KG
L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KG - Class 1 Fire Rated
L17 Hi Temperature Resistant Contact Spray Adhesive / Glue Canister - 110 Litre | 110KG - Class 1 Fire Rated
L40 Contact Spray Adhesive / Glue Can - 500ML
F55 Fast Dry Non Mecl Foam Spray Adhesive / Glue Canister 22 Litre | 22KG
F55 Fast Dry Non Mecl Foam Spray Adhesive / Glue Can 500ML
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 110 Litre
L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Can - 500ml - Class 1 Fire Rated