Next day delivery available for Mainland UK orders placed in the next: (Orders are dispatched at 12pm each day)

Bondloc Mitre Kit (Cyanoacrylate Adhesive & Activator)

Our Bondloc Plastic Weld is a toughened structural adhesive formulated for bonding dissimilar substrates as well as: unprepared metals, ceramics, wood, concrete and standard thermoset plastics Read the full product description

1 Pack Only: £4.79
Excluding VAT (tax): £3.99

How many would you like?

Looking for a bulk order not shown above - contact us today to see what we can offer you.

PSA code: PSABKIT | Manufacturer: Bondloc | Product condition: New | Stock status: In stock

Ask us a question about this product
Get a bespoke quote for this product

Orders are dispatched within 1 - 2 working days

Open your account today for 5% off your 1st order

Free standard mainland UK shipping
on all orders over 30 (excluding VAT)

Free advice to make your products last longer



Additional product images

Our Mitre Kit (Cyanoacrylate Adhesive & Activator) is a fast acting two component system comprising of cyanoacrylate adhesive and activator. It bonds most surfaces within 10 seconds, reducing mitre assembly bonding times compared to conventional wood adhesives.

This adhesive kit is: fast acting, contains a high viscosity adhesive with a low soak in to give better bond strength - can gap filling up to 0.2mm, and the activator reduces blooming and odour.

Consequently, it is very easy to use.


Applications

This Cyanoacrylate Adhesive & Activator Kit can be used to bond a variety of materials including: MDF, wood, chipboard, rubber, plastics, Perspex, uPVC, ceramics, aluminium and metals.

  • Medium-Density Fibreboard (MDF)
  • Wood
  • Chipboard
  • Rubber
  • Plastics
  • Perspex
  • Unplasticized Polyvinyl Chloride (uPVC)
  • Ceramics
  • Aluminium
  • Metals
  • Similar applications

Instructions for use

  1. Ensure surfaces are clean, dry and free from dust, grease and other contaminants.
  2. Spray one surface with the activator.
  3. Apply adhesive sparingly to the other surface.
  4. Bring together, position and hold for about 10 seconds.

Technical information

Property Value
Base 2 component Cyanoacrylate
Curing system Chemical curing
Adhesive
Appearance Clear Liquid
Specific gravity 1.06 g/cm
Mixed viscosity No sagging gel
Viscosity (Brookfield) @25C 1200-1800cps
Gap fill Up to 0.2mm
Working temperature -20C to 80C
Activator
Appearance Clear liquid
Specific gravity 0.79 g/cm

Storage information

Store in original unopened containers between 4 and 25C. Reseal immediately once used, and protect from sources of ignition.


Not sure if this Mitre Kit (Cyanoacrylate Adhesive & Activator) is right for you?

If you are not sure if this adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.


Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.


Shipping Information

PSA Solutions offers the following shipping options:

  • Mainland UK shipping for orders over £30 (excluding VAT) is free
  • Mainland UK shipping for orders under £30 (excluding VAT) is only: £4.99
  • Signed for - up to 3 working days is only: £5.99
  • Next day delivery - when ordered before 12pm is only: £11.99
  • Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
  • Europe starts from only: £22.20
  • US, China, Middle East & South East Asia only: £43.78
  • Rest of the world from only: £61.58

Returns Information

If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.

Product Questions

    Product questions for our: DISCONTINUED: 17.5Kg Tuskbond Spray Adhesive Pots (A different size of this product)

    • Hello there, This glue pot costs 156.00 each - do you replace everything in the picture each time for the 156.00 or is a 2nd cheaper? - Nancy
    • With regards to our pressure pots, the canisters are completely disposable so we replace the entire unit at the same cost. We can also offer special loyalty codes for regular users, or multiple orders of 4 canisters - Ian, Product Support Manager
    • Hi is this approved for bonding EPDM rubber to OSB boarding. Thank you - Julian
    • Hi Julian, I cannot say that this adhesive has been approval as such for this application; but, we have had people purchase the product for this purpose in recent months. Hope this helps - Ian, Product Support Manager
    • Is this suitable for exterior use? If not, do you have a contact adhesive that is suitable? Thanks - Jim
    • Hi Jim, I would probably recommend the high heat version spray adhesive, allowing for more temperature fluctuation. Ian - Product Support Manager
    • Dear Sirs, we are boats manufacturers from Latvia. Can you please send me price offer for this product and maybe similar products? We need to stick carpets to the boats. So the basic requirement is humidity resistance. Can you determinate also price for tubes connection and the pistol ? - Best regards Lauris
    • Hello Lauris, thank-you for your enquiry. Please could you confirm if the carpet is PVC backed, as the Tuskbond is not compatiable with PVC. I Look forward to hearing from you - Matt, Product Support Manager
    • Good afternoon, Could you please advise how man usable mL of glue are within this container? Thanks Connor
    • Hello Connor, In order to determine the Ml of glue in the canister, we would need to know the surface it is being sprayed on. It can vary from substrate to substrate - Matt, Product Support Manager
    • What is the coverage of your 17.5kg contact adhesive - Live Chat
    • Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
    • MDF to Laminate - Live Chat
    • If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
    • Thanks - Live Chat

    Product questions for our: Tuskbond Contact Spray Adhesive 500ml Snagging Cans (A different size of this product)

    • Hi, Is the spray ideal for bonding foam together also is it ideal for bonding foam to wood Thank You David.
    • Hi David, Yes both applications would be fine. Be sure to apply a layer of adhesive to both surfaces and then bring them together and apply pressure as the adhesive layers start to skin over - Ian, Product Support Manager
    • we use acoustic panels made from semi rigid fibreglass and which to stick them to walls usually painted will this work and to what temperature? - Peter
    • Hi Peter, Yes this should be fine, as long as you spray both surfaces and allow the adhesive to start skinning before bringing the surfaces together. This will withstand temperatures up to about 70C. - Ian, Product Support Manager
    • Hi Is this good to stick vinyl paper backed borders to painted walls? Is this a standalone can or would i need a gun to go with it? - Mark
    • Hi Mark, Thank you for your enquiry. I would not recommend our Tuskbond adhesive for this application due to the solid content in the adhesive! This could possible result in an uneven surface once dry and may cause your border to discolour after a period of time. Our recommendation would be to use standard wallpaper paste - Ian, Product Support Manager
    • Hi, I am looking for some spray contact adhesive to stick laminate to MDF. Normally I would use tuskbond canisters with a spray gun but as I am working on this as a small project rather than for work, I don't have the budget to buy the gun and 22l canister. what sprays can you recommend to get the job done? Thanks Sofia
    • Hi Sofia, this product will be my recommendation for what you require - Ian, Product Support Manager
    • I am looking at your Tuskbond heat resistant spray adhesive and you advertise it as Class 1 approved. Is this the highest fire rated spray adhesive you have or do you have others? - Julia (Live Chat)
    • This is the highest we have currently julia. What is your application Julia? - Ian, Product Support Manager
    • I want to glue fire rated fabric onto fire rated card. Do you have a certificate for this product to say it is compliant with Class 1? - Julia (Live Chat)
    • Leave me your email address and i will get the tech info over to you this afternoon - Ian, Product Support Manager

    Product questions for our: 20g Bottle of Ethyl Cyanoacrylate (Industrial Strength Superglue) (A different size of this product)

    • Dear Sirs Will this adhesive bond stainless steel and brass, additionally are there any suppliers in my locality, i.e. Derby, please? Yours faithfully R. P. Blackwell
    • Morning Richard Thankyou for your enquiry, and yes the superglue will bond both substrates no problem. You can purchase this product directly on our website for next day delivery, providing your order is with us before 2pm - Ian, Product Support Manager

    Product questions for our: DISCONTINUED: 17.5kg Tuskbond High Heat 100C Heat Resistant Adhesive (A different size of this product)

    • What is the coverage of your 17.5kg contact adhesive - Live Chat
    • Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
    • MDF to Laminate - Live Chat
    • If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
    • Thanks - Live Chat

    Product questions for our: DISCONTINUED: 17.5kg Tuskbond Gold Spray Adhesive Pot (A different size of this product)

    • What is the coverage of your 17.5kg contact adhesive - Live Chat
    • Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
    • MDF to Laminate - Live Chat
    • If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
    • Thanks - Live Chat

    Product questions for our: DISCONTINUED 17.5kg Tuskbond Spray Adhesive Pot & Adhesive Spray Glue Gun & Hose (A different size of this product)

    • Hi is this approved for bonding EPDM rubber to OSB boarding. Thank you - Julian
    • Hi Julian, I cannot say that this adhesive has been approval as such for this application; but, we have had people purchase the product for this purpose in recent months. Hope this helps - Ian, Product Support Manager
    • Is this suitable for exterior use? If not, do you have a contact adhesive that is suitable? Thanks - Jim
    • Hi Jim, I would probably recommend the high heat version spray adhesive, allowing for more temperature fluctuation. Ian - Product Support Manager
    • Dear Sirs, we are boats manufacturers from Latvia. Can you please send me price offer for this product and maybe similar products? We need to stick carpets to the boats. So the basic requirement is humidity resistance. Can you determinate also price for tubes connection and the pistol ? - Best regards Lauris
    • Hello Lauris, thank-you for your enquiry. Please could you confirm if the carpet is PVC backed, as the Tuskbond is not compatiable with PVC. I Look forward to hearing from you - Matt, Product Support Manager
    • Good afternoon, Could you please advise how man usable mL of glue are within this container? Thanks Connor
    • Hello Connor, In order to determine the Ml of glue in the canister, we would need to know the surface it is being sprayed on. It can vary from substrate to substrate - Matt, Product Support Manager
    • What is the coverage of your 17.5kg contact adhesive - Live Chat
    • Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
    • MDF to Laminate - Live Chat
    • If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
    • Thanks - Live Chat

    Product questions for our: 50g Bottle of Ethyl Cyanoacrylate (Industrial Strength Superglue) (A different size of this product)

    • Dear Sirs Will this adhesive bond stainless steel and brass, additionally are there any suppliers in my locality, i.e. Derby, please? Yours faithfully R. P. Blackwell
    • Morning Richard Thankyou for your enquiry, and yes the superglue will bond both substrates no problem. You can purchase this product directly on our website for next day delivery, providing your order is with us before 2pm - Ian, Product Support Manager

    Reviews for this product from confirmed past customers

    To qualify to be added below, the reviewer must have purchased this product from us.

    The following reviews are from other sizes of this product

    Product reviews for our: DISCONTINUED: 17.5Kg Tuskbond Spray Adhesive Pots (A different size of this product)


    Arcmodels

    Very good product, 4/5 for usefulness. Very good for veneers and thin laminates. Only problem is what to do with the empty cylinders?

    4 Stars


    Krzysztof Kwasnik

    Was my second order with PSA Solution, very good product and good price. Easy to order and good delivery service.

    5 Stars

    Product reviews for our: Tuskbond Contact Spray Adhesive 500ml Snagging Cans (A different size of this product)


    Peter

    Its a great product, delivered promptly. Entirely satisfied!

    5 Stars

    Product reviews for our: 20g Bottle of Ethyl Cyanoacrylate (Industrial Strength Superglue) (A different size of this product)


    TheDentureClinicLtd

    Fantastic product. Noticeably better and stronger than any off the shelf super glues. Absorbs into the surface which you want to stick together so creates a much better bond. Best super glue you'll find.

    5 Stars


    Steve

    Hi this a great product, this is the first time I have used it. I have used it on a number of materials and bonds very strong and easy to use. When I run out I will definitely purchase some more. A nasesaty for model building. Brilliant product,
    Steve.

    5 Stars