Next day delivery available for Mainland UK orders placed in the next:(Orders are dispatched at 12pm each day)

17KG Tuskbond HH550 Spray Adhesive

Our Tuskbond HH550 is a high heat multipurpose sprayable contact adhesive with a heat resistance of of up to 105C. Developed to bond a wide variety of substrates including head-linings, foam, leather, lining carpet, felt and fabrics. Read the full product description

Image of 17KG Tuskbond HH550 Spray Adhesive

Additional product images

Image of 17KG Tuskbond HH550 Spray Adhesive

Buy in Bulk & Save

1 Pot Only: £178.80
Excluding VAT (tax): £149.00

Save with Bulk Buying Options
Prices shown below exclude VAT (Tax)

How many would you like?

View other sizes of this product

Credit Cards Paypal

PSA code: PSAHH550 | Manufacturer: Tuskbond | Product condition: New | Stock status: In stock

Ask us a question about this product
Get a bespoke quote for this product

Orders are dispatched within 1 - 2 working days

Open your account today for 5% off your 1st order

Free standard mainland UK shipping
on all orders over £30 (excluding VAT)

Free advice to make your products last longer


Variations of this product

DescriptionPrice
Image of 13KG Tuskbond NC101 Spray Adhesive13KG Tuskbond NC101 Spray Adhesive
PSA Code: PSANC101
Buy in bulk and save
1 Pot Only: £178.80
Excluding VAT (tax): £149.00
Image of Spray Adhesive Starter Kit - Tuskbond One, 12FT Hose and Spray GunSpray Adhesive Starter Kit - Tuskbond One, 12FT Hose and Spray Gun
PSA Code: PSA1001
Buy in bulk and save
1 Pot Only: £270.00
Excluding VAT (tax): £225.00
Image of 13KG Tuskbond XPRO Spray Adhesive13KG Tuskbond XPRO Spray Adhesive
PSA Code: PSAXPRO
Buy in bulk and save
1 Pot Only: £178.80
Excluding VAT (tax): £149.00
Image of 17KG Tuskbond ONE Spray Adhesive17KG Tuskbond ONE Spray Adhesive
PSA Code: ONE
Buy in bulk and save
1 Pot Only: £134.40
Excluding VAT (tax): £112.00
Image of 17KG Tuskbond HH550 Spray Adhesive17KG Tuskbond HH550 Spray Adhesive
PSA Code: PSAHH550
Buy in bulk and save
1 Pot Only: £178.80
Excluding VAT (tax): £149.00
Image of 17KG Tuskbond G500 Spray Adhesive17KG Tuskbond G500 Spray Adhesive
PSA Code: PSAG500
Buy in bulk and save
1 Pot Only: £165.60
Excluding VAT (tax): £138.00

Require the hose & gun for this pot? - see our Starter Kit

If you also require the hose and spray gun for this pot see our Starter Kit with everything you need to get up and running quickly.
The 17.5KG Tuskbond One Spray Adhesive, a 12FT Tuskbond Spray Adhesive Hose, and the Tuskbond Economy Spray Gun.


Looking for 110 Litre pots?

We can also provide 110 Litre spray adhesive pots. If you require these please contact our sales team.


Product description

Our Tuskbond HH550 is a high heat multipurpose sprayable contact adhesive with a heat resistance of of up to 105C.

Developed to bond a wide variety of substrates including headlinings, foam, leather, lining carpet, felt and fabrics.

Tuskbond High Heat Spray adhesive (HH550) has a long open time and provides a fast, strong and permanent waterproof bond with excellent heat resistance.

Amoung various suitable applications, this spray adhesive is ideal for van conversions, marine upholstery and vechicle restoration.


Features

  • High temprature contact adhesive
  • Fast, strong, permanent bond
  • Fast drying
  • Excellent heat resistance

Handling & Storage information

You will need to keep this adhesive away from heat, sparks and open flame, along with not using in confined spaces without adequate ventilation and / or a respirator.

On top of this please wear protective clothing as described and do not eat, drink or smoke when using this product.

DO NOT ALLOW THE PRODUCT TO FREEZE

Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months.


Technical information

PropertyValue
ColourAmber
Appearance Aerosol
OdourChlorinated hydrocarbons
Initial boiling point and range40C @ 760 mm Hg Boiling point of dichloromethane
Viscosity550-750 cP @ 20C for liquid base
Volatile organic compound This adhesive contains a maximum VOC content of 718 g/l.

Directions to use

Surfaces should be clean, dry and free from grease, oil and dust. Excessive dust will impair performance. Concrete and screed floors should be fully cured with an efficient damp proof membrane. See BS CP102 and BS 5325. For best results the substrate and product should be bonded at temperatures between 15?C and 25?C.

Asphalt and surface membranes must be covered with at least 3mm of good quality smoothing compound.

Dusty or friable surfaces should be treated with a suitable primer. Underfloor heating should be turned off for 48 hours prior to and after the installation.

Attach a suitable spray nozzle, such as a Unijet 6501, to the spray gun. Use a Spray Gun with a 40cm extension so that the adhesive can be applied whilst standing.

Connect the hose to the canister and the spray gun to the hose and tighten the connections. If there are any leaks, tighten the connection at the source of the leak.

Open the valve on the canister. The valve should remain open until the canister is used up. Use the locking nut on the gun after use. Turning off the valve will result in the adhesive drying in the hose and gun causing blockages.

Hold the spray gun 10-20cm away at 90 to the surface and apply a uniform coat of adhesive, ensuring 80-100% coverage.

When the adhesive is dry and very tacky it is ready to have the flooring material bonded to it.

Porous substrates may require two applications.

Drying takes approximately 1 to 2 minutes depending on substrates, ambient temperature and humidity. Over spraying and pooling of the adhesive will increase drying.

After spraying, remove the spray gun tip and rinse with Solvent Cleaner before it has cured.

Keep the valve open and the hose attached to the canister until there is no more adhesive. If the hose is removed, clean through with solvent cleaner to prevent adhesive drying, which will cause the gun and hose to block. Turn the canister off before removing the hose.


Disclaimer

All the information is based on practical experience and is published in good faith. However, because we have no control over the manner or conditions in which our products are used, or over work undertaken or end product manufactured by the purchaser, we cannot accept liability for results.

Responsibility for ascertaining the suitability of products for his purposes rests with the purchaser.

All conditions, representations, statements, warranties or guarantees whatsoever, whether express, implied or statutory, in respect of any goods manufactured, sold or supplied by us are hereby expressly excluded and we accept no liability in respect of any claim for damage or consequential loss caused to any property arising directly or indirectly out of the use of our products or goods.


Not sure if this spray adhesive is right for you?

If you are not if this contact adhesive tape is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.


Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.


Shipping Information

PSA Solutions offers the following shipping options:

  • Mainland UK shipping for orders over £30 (excluding VAT) is free
  • Mainland UK shipping for orders under £30 (excluding VAT) is only: £4.99
  • Signed for - up to 3 working days is only: £5.99
  • Next day delivery - when ordered before 12pm is only: £11.99
  • Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
  • Europe starts from only: £22.20
  • US, China, Middle East & South East Asia only: £43.78
  • Rest of the world from only: £61.58

Returns Information

If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.


Product Questions

    Product questions for our: Spray Adhesive Starter Kit (A different size of this product)

    • What is the coverage of your 17.5kg contact adhesive - Live Chat
    • Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
    • MDF to Laminate - Live Chat
    • If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
    • Thanks - Live Chat

    Product questions for our: 17KG Tuskbond ONE Spray Adhesive (A different size of this product)

    • Hi, We are currently working in Holland and using contact adhesive to fit plastic wall panels to both concrete and Plasterboard walls. We have approx 450 m2. Can you please advise what would be best to use for your selection. We would require the spray gun also. Thanks in advance - Martin.
    • Hi Martin, this product will be ideal for what you require - Ian, Product Support Manager
    • Hi, We need to stick some acoustic timber panels that weigh approx 3kg each to a painted wall, would this product be suitable to fix them? Thanks Richard
    • Hi Richard, yes this will be ideal for your application - Ian, Product Support Manager