This Cold Weather Aluminium Foil tape is ideal for the following uses:
Our 'cold start' patented acrylic adhesive is solvent based and resistant to Moisture. What this means to you, is that can be applied even in cold damp conditions.
Our 'cold start' patented acrylic adhesive is solvent based and resistant to chemicals when in situ.
Our 'cold start' patented acrylic adhesive is solvent based and flame resistant being class 'O' Certified. This certification means this tape has an added level of protection where limited combustibility is required in high-risk areas.
Our 'cold start' foil range is ideal when heat reluctance and thermal conductivity are required. These products are formulated to protect sensitive components in various applications.
Our 'cold start' acrylic foil tapes are perfect for heat shielding in demanding applications. In situ the product will help shield components sensitive to heat.
Good in bad weather
The ultimate in all weather tapes. This tape excels in demanding temperatures from -40°C to 120°C.
Solvent based adhesive
As a result of this foil tape being a solvent based adhesive it provides an immediate waterproofing protection after application, even before they have dried. This means rain hitting this foil tape after it has been applied is not a big issue.
This tape is also not damaged by freezing temperatures and better adheres to porous surfaces.
Ready to use
No on site extra additives are required to apply this tape.
Excellence adhesion to wood based sheathings
Ideal for light commercial products where an excellent adhesion is required.
This tape should ideally be stored at temperatures of 16°C to 25°C.
This aluminum foil tape is not suitable for use with attaching Polystyrene to Polystyrene or for use with mesh.
|Thickness||2.4 mils||0.06 mm|
|Peel Adhesion||35 oz/in||9.7 N/25 mm|
|Shear Strength||>24 hrs @ 2.2 psi||>24 hrs @ 15.2 kPa|
|Tensile Strength||30 lb/in||136 N/25 mm|
|Service Temperature||-40°F to 250°F||-40°C to 121°C|
|Roll Size||2, 21?2, 3, 4 in x 60 yds||48, 64, 72, 99 mm x 55 m|
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information on how to apply this foil tape.
If you require the Material Safety Data Sheet (MSDS) for this aluminum foil tape please do not hesitate to contact us, and we will be happy to send it to you.
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
To qualify to be added below, the reviewer must have purchased this product from us.
I found this tape very easy to apply and it performed exactly as I had hoped for . At least 5/5