The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
Next day delivery available for Mainland UK orders placed in the next:(Orders are dispatched at 12pm each day)
Carpet Spray Adhesive | Carpet Adhesive Spray Glue
What is Carpet Spray Adhesive | Carpet Adhesive Spray Glue?
Carpet spray glues have been specially designed to bond to Carpet, Carpet tiles, Rugs, Foam, Fabrics, Fibrous materials, and many other porous and non-porous substrates.
The main properties of these contact glues are that they are free of Hazardous Air Pollutants (HAPs), have an extremely high tack, have excellent room temperature contact bonds, excellent green strength and good heat resistance with fast drying and long open times.
What's the difference between the different floor glues?
L40 General Purpose Glue
TensorGrip® L40 is a General Purpose (GP) contact spray adhesive 22 Litre / 22Kg pressure pot of fast drying contact adhesive which is suitable for bonding a variety of materials to: Carpet, Foam, Fabrics, Fibrous materials, and many other porous and non-porous substrates.
It is arguably one of the best large pot spray adhesives you can buy and is supplied from a leading Global manufacturer.
F40 Aggressive Tack Adhesive
As part of our foam and upholstery range, F40 is a 22 Litre / 22KG web spray adhesive that is suitable for use on: carpet tile, thin fabric, thick fabric and foam applications.
F55 Fast Dry Non Mecl Foam Spray Adhesive / Glue Canister 22 Litre | 22KG
TensorGrip® F55 is a 22L / 22Kg fast dry pot of, NON-MECL adhesive. This spray adhesive is suitable for high demanding applications for foam, MDF, Plywood, Synthetic leather, fabric and upholstery applications.
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre | 22kg | 110 Litre | 110Kg
TensorGrip® L21 is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. TensorGrip® L21 is designed for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required and can also be used for bonding sheet metals, where surface preparation is very important.
What is the consistency of insulation glues?
Insulation sprayable adhesive glues tend to come with a web like consistancy once sprayed.
Bulk buying options available
If you are looking to buy sprayable glues in bulk, every option we have on offer comes with bulk buying options. Simply put the more you buy, the more you save.
What are Carpet Spray Adhesives Used for?
This self adhesive carpet adhesive spray is ideal for being used for or with:
- Fibrous materials
- General flooring surfaces
- Porous and none porous substrates
- Other similar applications
How do you apply carpet adhesives?
Firstly, you need to make sure you have an adhesive that is designed for use on carpet. Many adhesives simply aren't suitable, and either won't stick (adhere) to the carpet, or can damage it.
These carpet glue has been designed to bond these types of surfaces together.Firstly, make sure that the surfaces that the glue is being applied on are clean, dry and free from dirt, dust, oil, loose paint, wax, grease, etc...
Once the area where the contact adhesive will be used is clean, make sure you have adequate ventilation, and where possible we recommend shaking the canister well before using.
Attach and secure the hose tightly onto the spray gun (both sold separately - please see our starter kit above if required) with required tip. Then attach the other end of the hose onto the canister.
At this point make sure the hose-valve connections are securely tight, and then open the valve on the canister slowly and fully. Next check for any leaks during this process.
Once you are happy there are no leaks, unlock the trigger on the spray gun to start spraying.
Prior to full spraying, please check the compatibility by spraying a small test patch of the adhesive on the carpet / surface. If this test goes well then continue using the full application.
Once you start spraying, make sure you spray about 10cm - 20cm (4 Inches - 8 inches) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of glue in areas that appear to need more adhesive.
For best results, make sure you spray both surfaces to be bonded with one surface vertically and the other surface horizontally and allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
Adhere surfaces and press together with adequate pressure to get the best bond.
A roller is recommended to apply a uniform pressure to achieve maximum strength (please see our spray accessories section if you require this), and allow 24 hours for the adhesive to fully cure.
For best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F - 80°F (16°C - 27°C).
Can carpet spray tips clog up and how do you unclog them?
If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice.
Once it is clear continue spraying.
Who are Pressure Sensitive Adhesive Solutions?
PSA Solutions Ltd, are: carpet spray glue suppliers, based in Leicestershire, UK.
We have a large range of: spray glues, in our Leicester warehouse, ready to be dispatched - normally - within 1-3 days.
So if you can not see the adhesive you are looking for contact our friendly sales team for free advice.
Where can I find out more?
To find out even more technical information about the different types of flooring available please see this Wikipedia page.