The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues

L24 High Performance Veneer Spray Contact Adhesive / Glue 22 Litre

TensorGrip® L24 is a 22 Litre spray adhesive can which can cover an area up to 80M2. This spray glue has been designed especially for bonding most paper backed veneers to MDF, chipboard and plywood substrates. This spray glue has not only undergone extensive testing, but the global manufacturer worked closely with a large veneer producer in the EU to ensure that this adhesive is fit to endure the most demanding of applications and environments. Read the full product description

Buy in Bulk & Save

1 Canister Only: £307.20
Excluding Tax: £256.00

Save with Bulk Buying Options
Prices shown below Exclude Tax

How many would you like?

View other sizes of this product

Credit Cards Paypal

PSA code: PSAL24 | Manufacturer: TensorGrip | Product condition: New | Stock status: In stock

Ask us a question about this product
Get a bespoke quote for this product

Orders are dispatched within 1 - 2 working days

Open your account today for 5% off your 1st order

Free standard mainland UK shipping
on all orders over £30 (excluding VAT)

Free advice to make your products last longer


Variations of this product

DescriptionPrice
Image of L40 Contact Spray Adhesive / Glue Can - 500MLL40 Contact Spray Adhesive / Glue Can - 500ML
PSA Code: PSAL40B
Buy in bulk and save
1 Canister Only: £5.70
Excluding VAT (tax): £4.75
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500MLL22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML
PSA Code: PSAL22A
Buy in bulk and save
1 Canister Only: £12.46
Excluding VAT (tax): £10.38
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 110L | 110KGL22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 110L | 110KG
PSA Code: PSAL22C
Buy in bulk and save
1 Canister Only: £1,056.00
Excluding VAT (tax): £880.00
Image of L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KGL40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
PSA Code: PSAL40C
Buy in bulk and save
1 Canister Only: £674.40
Excluding VAT (tax): £562.00
Image of L40 Contact Spray Adhesive / Glue Pot - 22Litre | 22KGL40 Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
PSA Code: PSAL40
Buy in bulk and save
1 Canister Only: £134.40
Excluding VAT (tax): £112.00
Image of L24 High Performance Veneer Spray Contact Adhesive / Glue 22 LitreL24 High Performance Veneer Spray Contact Adhesive / Glue 22 Litre
PSA Code: PSAL24
Buy in bulk and save
1 Canister Only: £307.20
Excluding VAT (tax): £256.00
Image of L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KGL22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KG
PSA Code: PSAL22
Buy in bulk and save
1 Canister Only: £222.00
Excluding VAT (tax): £185.00
Image of L17 Hi Temperature Resistant Contact Spray Adhesive / Glue Canister - 110 Litre | 110KGL17 Hi Temperature Resistant Contact Spray Adhesive / Glue Canister - 110 Litre | 110KG
PSA Code: PSAL17C
Buy in bulk and save
1 Canister Only: £950.40
Excluding VAT (tax): £792.00
Image of L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KGL17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
PSA Code: PSAL17
Buy in bulk and save
1 Canister Only: £234.00
Excluding VAT (tax): £195.00

TensorGrip® L24 is a high-performance veneer adhesive which is part of our Joinery range.

This fine web spray adhesive is also California Compliant and suitable for bonding paper backed and natural veneers.

Consequently, TensorGrip® L24 provides a permanent bonding of veneers where immediate bond strength, water and lacquer resistance along with high heat resistance are required.

This spray adhesive is suitable for bonding veneers onto a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials.


Spray adhesive benefits

When it comes to this contact adhesive it can be used to bond materials on to the following materials.

  • Lacquer resistant
  • Good heat resistance - up to 115°C
  • Very high solids
  • Portable systems
  • Non-chlorinated adhesive
  • Easy application control
  • CO-REZ - Technology
  • California compliant
  • Webspray
  • Suitable for most veneers

Unique Formula

This glue has a unique formula which prevents soak in of the adhesive on porous surfaces. This provides you with very high coverage and superior film build, resulting in stronger bonds.


Low Odour & with a Fast Tack

This spray glue had a low odour, and combined with fast tack time makes this premium adhesive suitable for on-site and factory applications.


Spray adhesive consistancy

This consistancy of this contact adhesive is fine consistant web like spray pattern.


Spray adhesive uses information

When it comes to this contact adhesive it can be used to bond materials on to the following materials.

  • MDF
  • Veneer
  • Chipboard
  • Plywood
  • Countertops
  • Cabinets
  • Contours
  • Doors
  • Plywood
  • Veneer (Paperbacked)
  • Veneer (Natural)
  • Standard laminate
  • Other timber sheet materials

Coverage information for this spray glue

This contact adhesive can cover an area up to 80M2.


Save when you buy in bulk

We offer bulk buying options with this sprayable glue. So the more you buy, the more you save.


Contact canister storage and canister change over instructions

Turn valve on canister into the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.

Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.

If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister.

Close and lock the spray gun.


Handling & Storage Information

  • Consult Material Safety Data Sheet prior to use
  • DO NOT store at temperatures over 50°C
  • Avoid exposure to direct sunlight
  • DO NOT store directly on a concrete floor
  • For optimum performance, store at 18°C during use; but, it must always be above 10°C
  • When connected, keep the valve open and hose pressurised at all times
  • DO NOT close the valve until ready to connect to new cylinder
  • Release pressure in hose before disconnection
  • Always test product to determine suitability for your particular application prior to use in production

How to use this contact spray adhesive

This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F - 80°F (16°C - 27°C).

Use with adequate ventilation, and when possible we recommend shaking the canister well before using.

Then start spraying. It is as simple as that.

Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.


Spraying recomendations

  1. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc...
  2. Spray about 10-20 cm (4" – 8") away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
  3. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
  4. Allow 2 - 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
  5. Adhere surfaces and press together with adequate pressure.
  6. roller is recommended to apply a uniform pressure to achieve maximum strength.
  7. Allow 24 hours for the adhesive to fully cure.
  8. If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice

Not sure if this spray adhesive is right for you?

If you are not sure if this contact adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.


Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.


Shipping Information

PSA Solutions offers the following shipping options:

  • Mainland UK shipping for orders over £30 (excluding VAT) is free
  • Mainland UK shipping for orders under £30 (excluding VAT) is only: £4.99
  • Signed for - up to 3 working days is only: £5.99
  • Next day delivery - when ordered before 12pm is only: £11.99
  • Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
  • Europe starts from only: £22.20
  • US, China, Middle East & South East Asia only: £43.78
  • Rest of the world from only: £61.58

Returns Information

If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.


Product Questions

  • Can this product be used to stick veneer back that is becoming detached? - Murray
  • Hi Murray. Yes, it can, as long as surface relatively clean and any excess glue removed. Thanks - Matt, Product Support Manager

Product questions for our: L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KG (A different size of this product)

  • Dear sir/madam, I hope my message finds you well. I am about to start a project where I need to glue some small pieces of plastic into a sheet of fabric. Now the small plastics are sitting together in a piece of tulle and I will jist glue them as they are onto the fabric. I just wanted to ask if you have any kind of adhesive that may be suitable for me in this case. I saw the L22 Non-Mecl Fine Web Spray Adhesive that mey fit my needs but any professional advice will be well received. Thank you in advance. Mr. Margarit
  • Hello Margarit, and thank-you for your enquiry. The L22 would certainly suit your application, on the basis the plastic not too conformable, as this could signify a higher content of plasticisers. These could react with the glue. On that basis, L22 would be the way to go - Best Regards Matt, Product Support Manager