The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
PSA1112, is a high-temperature masking tape which has been developed for use primarily as a spray painting mask tape in high-temp environments up to 110°C; but, are also ideal for general painting use for the professional or DIY painter and decorator.
This tape has been designed to combine consistent unwinding, easy tear and conformability, performing extremely well when used tape on tape and with masking paper and protective film.
It is created from a Premium crepe paper masking tape with rubber base adhesive, specific for automotive car refinishing applications during drying cycles at high temperatures up to 230°F / 110°C. It guarantees high adhesion and doesn’t leave adhesive traces when removed. Can be exposed to UV rays in outdoor application up to 3 days.
These types of tapes tend to be high-performance automotive masking tapes that have been designed to mask off surfaces for painting. They are a crepe paper-based masking tape with a substantial structure and used a lot in auto shops and garages during collision repairs and painting processes.
Crepe paper masking tape with a substantial structure and high performance, specific for the automotive sector during collision repairs and painting processes with drying cycles at high temperatures up to 110°C (for 60 min).
Consequently, these types of tapes combine controlled unwinding, easy tear and conformability abilities, while performing well when overlapping the tape, with masking paper and masking film. It provides excellent paint edges, clean and safe removal without residues and breakings
Well performing in overlapping the tape, with masking paper and masking film, it provides excellent paint edges, clean and safe removal without residues and breakings.
- High Performance rubber-base adhesive
- Saturated semi crepe paper
- Temperature Resistance up to 230°F / 110° C. (30 min.) 194°F / 90° C. (60 min.)
- Excellent adhesion & mechanical features
- Compatible with all popular paints and lacquers
- Excellent conformability on irregular surfaces
- UV resistance up to 3 days
- Instant adhesion to all vehicle surfaces and good holding power
- Conforms well to curved surfaces without lifting or tearing
- Compatible with waterborne and solvent-based coatings
- Controlled unwind
- Easy clean removal without adhesive residues
- Sharp and clean paint edges
The colour of this tape is Sun Yellow.
This tape must be stored in a dry location, protected from direct sunlight exposure and from freezing.
Storage temperatures should be as close as possible to room temperature; suggested storage temperature should range from 15 to 25°C with max. relative humidity of 60%.
Make sure the surface you wish to place the tape on is cleaned, dried and free from oil and dust.
It is suggested not to apply the tape with temperatures lower than 10°C.
With a storage temperature lower than 10°C, it is always suggested temperature reconditioning of the tape at room temperature ( 15°C - 25°C ) before its use.
Shelf life information
(No yellowing and < 10% loss in performance at 23°C, 50% humidity) is considered 12 months.
PSA does not take responsibility for the defective material is not stored and used in accordance with the conditions listed above.
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
Not sure if this Masking tape is right for you?
If you are not if this self-adhesive tape is right for your individual requirements please do not hesitate to contact our friendly sales team and we will be happy to help you.
|Characteristics||Metric Values||Imperial values||Test Method|
|Total Weight||92 g/m2||92 g/m2||ISO 536|
|Total Thickness||125 µm||4.9mils||-|
|MD tensile strength||38 N/cm||21.7 Lbs/in||AFERA 5004/PSTC 131|
|MD elongation at break||7%||7%||AFERA 5004/PSTC 131|
|Adhesion to steel plate||2.3 N/cm||21.0 oz/in||AFERA 5001/PSTC 101|
|UV light resistance||24 hours||24 hours||Atlas Suntest XLS+ (II)|
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
- Mainland UK shipping for orders over £30 (excluding VAT) is free
- Mainland UK shipping for orders under £30 (excluding VAT) is only: £4.99
- Signed for - up to 3 working days is only: £5.99
- Next day delivery - when ordered before 12pm is only: £11.99
- Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
- Europe starts from only: £22.20
- US, China, Middle East & South East Asia only: £43.78
- Rest of the world from only: £61.58
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.