Call us for advice - or just to place an order on: 0116 286 5141
The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
PSA6000 Grey Spunbond Filter Tape is an Anti dust breather tape which is used to cover the end flutes of polycarbonate sheet, allowing the sheet to breathe and so preventing the build up of condensation. Read the full product description
Buy in Bulk & Save
1 Roll Only: £2.14Excluding Tax: £1.78Price / Metre: £0.18
Save with Bulk Buying OptionsPrices shown below Exclude Tax1 Roll - £1.78 / Roll45 Rolls - £1.62 / Roll = £72.90 (Save 8.99% - £7.20)
How many would you like?
Add to your basket »
PSA code: PSA6000F | Product condition: New | Stock status: In stock
View this product's datasheet
Ask us a question about this productGet a bespoke quote for this product
Orders are dispatched within 1 - 2 working days
Open your account today for 5% off your 1st order
Free standard mainland UK shippingon all orders over £30 (excluding VAT)
Free advice to make your products last longer
PSA6000A is a Currently: 38mm x 10 Metres Filter Tape For 16mm Polycarbonate Sheet, which is an open pore self adhesive Anti Dust Breather Tape for Multi Wall Polycarbonate Roof Panels and is BBA Certified.
This tape is a breathable self adhesive tape commonly used to seal the ends of multi wall polycarbonate sheeting, minimising the ingress of dust, debris and insects whilst allowing the escape of moisture vapour
This Grey Spun-bond Filter Tape is used to cover the end flutes of polycarbonate sheet, allowing the sheet to breathe and so preventing the build up of condensation.
The Filter Tape For Polycarbonate Sheet has two strips of specialist adhesive, that are polycarbonate friendly, running down the outer edges leaving a non-adhesive area of filter material to cover the exposed flutes.
Our Filter Tape For Polycarbonate Sheet is BBA certified for use as a polycarbonate end tape
Whether its a car port roof or conservatory roof on your building, our Filter Tape For Polycarbonate Sheet when applied to the edges of your polycarbonate sheet will prevent condensation build up and physical debris such as dust entering the sheet.
This tape has a high performance adhesive system offering high tack, high adhesion and excellent elevated temperature performance. Therein is an industry approved adhesive providing UV stability and water resistance. By nature the fabric surface is water repellent and possesses excellent breathability over its open surface area.
The material has been manufactured from FDA approved materials and is suitable for extended skin contact.
Tested to BS 3177: 1959 (1995) mean permeability 4474 (gm²24h) **
In accordance with MOAT 48 : 1991. This test procedure is intended to replicate the ability of the filter tape to resist the passage of water
and therefore the formation of condensation within the cavities of the polycarbonate under wet / heat cycling conditions.
Filter cut point 45 microns (rounded up to the nearest 5mic) **
The above information is given in good faith and for guidance only. The user shall be responsible for
determining that the performance of the product is sufficient for his application. The quoted values are based
on averages and should not be taken as maximum or minimum values for specific purposes.
Self adhesive products are generally considered to be safe and inert.
Health – Under normal conditions of use and handling no hazards are anticipated but good hygiene
should always be observed. No special protection is required. If skin irritation occurs as a result of
handling, wash affected areas with soap and water and wear protective clothing to avoid future contact.
Polyester / Polypropylene, Acrylic Adhesive, Hot Melt Adhesive. Tissue and Release liner with no hazardous components.
No mandatory labelling is required.
Fire extinguishing media – Foam, dry chemical, or water.
Store at room temperature
No special handling required
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
If you are not if this filter tape is right for your individual requirements please do not hesitate to contact our friendly sales team and we will be happy to help you.
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
25mm x 33 Metres Filter Tape For 16mm Polycarbonate Sheet
50mm X 33 Metres Filter Tape For 25mm Polycarbonate Sheet
60mm X 33 Metres Filter Tape For 35mm Polycarbonate Sheet
45mm X 33 Metres Filter Tape For 25mm Polycarbonate Sheet
38mm X 33 Metres Filter Tape For 16mm Polycarbonate Sheet
38mm X 10 Metres Filter Tape For 16mm Polycarbonate Sheet
45mm X 10 Metres Filter Tape For 25mm Polycarbonate Sheet
50mm x 33 Metres Blanking Tape
To qualify to be added below, the reviewer must have purchased this product from us.
I was so pleased to find the broader width polycarb tape to cover the ends of my 3 channel polycarb conservatory roof!