The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
PSA8551 is a: 19mm x 25 Metres Coroplast Wire Harness Tape. This wire harness tape is designed to keep your wiring together and out of the way.
This tape is ideal for being used in the automotive industry, and has been officially approved for use on the following models: BMW, Changan, Daimler, Fiat, Ford, Vauxhall / Opel, General Motors, Mazda, Nissan, Renault, Volkswagen to name a few.
This tape has numerous benefits. These are that it is:
- Weather flexible
- Abrasion resistant
- Heat resistant
- Flame retardant
- Halogen free
- tearable by hand
Tape specification
RT-Version (reverse tape / spiral)
Coroplast's RT wire harness tapes are wrapped adhesive on adhesive so that only the carrier and not the adhesive comes into contact with the harness.
Application uses
This tape is designed as a wire harness and control tape. This make it ideal to keep wires grouped together.
Carrier Information
The carrier for this tape is a a stitch-bonded PET (non-woven).
Size information
This tape is 25 metres in length and 19mm wide, and 0.45mm thick.
Adhesive information
Then adhesive on this tape is a synthetic rubber.
Not sure if this wire harness tape is right for you?
If you are not sure this cable wrap tape is right for your individual requirements please do not hesitate to contact our friendly sales team and we will be happy to help you.
How to apply this tape
Surfaces must be clean, dry, free from grease and dirt.
We recommended using a cleaning agent such as: Propan-2-ol.{IPA}.
Please note the manufacturer's safety instructions should be followed and customers are recommended to ensure compatibility of the solvent and their substrate. Ideal bonding substrates are those which are: clean, dry, flat, smooth, dust free and non-porous.
Low temperatures may increase the risk of condensation, reducing the tack of the product. As a result, life expectancy will vary with temperature and humidity.
This tape may be applied by hand direct from a roll applying even pressure.
Technical Information
Specification | Technical Values |
---|---|
Carrier | Stitch-bonded - PET (Non-woven) |
Adhesive | Synthetic rubber |
Thickness [mm] | 0.45 |
Tear strength [N/cm] | 50 |
Elongation at break [%] | 20 |
Adhesion to steel [N/cm] | 4.5 |
Temperature resistance Upper [°C] | 105 |
Temperature resistance Lower [°C] | -40°C |
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Shipping Information
PSA Solutions offers the following shipping options:
- Mainland UK shipping for orders over £30 (excluding VAT, Glue Pots, and shipping) is free
- Mainland UK shipping for orders under £30 (excluding VAT, Glue pots and shipping) is only: £6.75
- Signed for - up to 3 working days is from only: £6.75
- Next day delivery - when ordered before 12pm is from only: £11.99
- Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
- Europe starts from only: £22.20
- US, China, Middle East & South East Asia only: £43.78
- Rest of the world from only: £61.58
Returns Information
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.