Call us for advice - or just to place an order on: 0116 2865141
The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
TensorGrip® L22 is a 110L / 110Kg pot for permanent bonding of materials where immediate bond strength, water and high heat resistance are required. It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important Read the full product description
This item qualifies for free Mainland UK shipping
Buy in Bulk & Save
1 Canister Only: £1,056.00Excluding Tax: £880.00
Save with Bulk Buying OptionsPrices shown below Exclude Tax1 Canister = £880.00 / Canister3 Canisters - £799.00 / Canister = £2,397.00 (Save: 9.20% - £243.00)5 Canisters - £774.40 / Canister = £3,872.00 (Save: 12.00% - £528.00)
How many would you like?
Add to your basket »
PSA code: PSAL22C | Manufacturer: TensorGrip | Product condition: New | Stock status: In stock
View this product's datasheet
Ask us a question about this productGet a bespoke quote for this product
Orders are dispatched within 1 - 2 working days
Open your account today for 5% off your 1st order
Free standard mainland UK shippingon all orders over £30 (excluding VAT)
Free advice to make your products last longer
This spray adhesive starter kit comes with everything you need to get up and running quickly. The 22KG TensorGrip® L40 Spray Adhesive, a 12FT Spray Adhesive Glue Hose, and the Spray Glue Gun.
TensorGrip® L22 is a 110L / 110Kg pot for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required.
It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important.
This spray adhesive is Low VOC California Compliant.
This consistancy of this contact adhesive is web like.
When it comes to this contact adhesive it can be used to bond materials on to the following materials.
This contact adhesive can cover an area up to 400M2.
L22 has a number of advantages. Some of these are:
We offer bulk buying options with this sprayable glue. So the more you buy, the more you save.
All the information is based on practical experience and is published in good faith. However, because we have no control over the manner or conditions in which our products are used, or over work undertaken or end product manufactured by the purchaser, we cannot accept liability for results.
Responsibility for ascertaining the suitability of products for his purposes rests with the purchaser.
10 reason to use this spray glue include:
To change over the canister turn the valve on the canister into the off position, then spray out any remaining adhesive left in the hose.
Next, disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear - which indicates that the hose and gun are clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open, and do not disconnect the hose & gun from the canister.
Close and lock the spray gun.
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F - 80°F (16°C - 27°C).
Use with adequate ventilation, and when possible we recommend shaking the canister well before using.
Attach and secure the hose tightly onto the spray gun with required tip, and attach the other end of the hose onto the canister.
Make sure the hose-valve connections are securely tight, and then open the valve on the canister slowly and fully, checking for leaks during this process. Then once open unlock the trigger on the spray gun to start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.
If you are not sure if this contact adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
Spray Adhesive Starter Kit - 22Kg TensorGrip L40 | 12FT Hose & Spray Glue Gun
22L L72 One Way Stick Urethane Spray Adhesive
22L C10 - Polyurethane Foam Spray Adhesive
22L H45 - KoolTherm Panel Spray Adhesive
22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive
L40 Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Canister - 110 Litre | 110KG
L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KG
L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 110L | 110KG