The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
EZ304 are: 20.5mm x 7.5mm Square stick on feet. These are a genuine branded EaziStops, which measures: 20.5mm in diameter by 7.5mm high. There are 90 Square EaziStops to a sheet, and each quantity is for 1 whole sheet.
Each quantity is for 1 sheet of these stick-on-feet.
Made from Polyurethane
As these: stick-on-feet are made from: Polyurethane, they have several distinct advantages over similar self-adhesive-feet made from other inferior materials. These advantages are:
- Abrasion resistant
- Oil and solvent resistant
- Higher load bearing capacity than conventional rubber
- Higher Tear resistant than rubber - between 500-100 Ibs./linear inch
- Weather resistant
- Excellent noise dampening properties
- Electrical insulating properties
- Heat and cold resistant
These stick on feet are ideal for teh following types of uses:
- Furniture protection
- Adhesive sticky / stick on feet
- POP displays
- Glass industry
- Domestic appliances
- As replacments for laptop feet
- Automotive industry
- With exhibition displays
- Under chair legs
- Glass table top bumpers
- Glass pads for table tops
- Silicone bumpers
- Laptop feet
- Small glass cushions
- Adhesive silicone feet
- Silicone protectors
- Rubber pads for glass table tops
- Non slip / slip resistant coaster pads
- Adhesive pads
- Self adhesive bumpers
- Chopping board feet
Application uses for Square Clear Stick on Feet
This stick-on-feet is perfect for furniture protection, due to its sound dampening properties. This stops and buffers as it reduce noise and absorb shock. This means these Eazi Stops can also be be used under glass to prevent the glass slipping when used in conjunction with most glass top furniture.
Stick on feet
Our square Eazistops are: self-adhesive-feet, which have a self-adhesive back to allow for them to be stuck onto a range of products without the need to use fixings such as screws or additional glue.
Non slip feet for: Electronic and Medical Devices
These feet can be used as non-slip feet - or spacers - on all manner of: audio, medical, telecoms and general desktop units. This gives you the added advantage of extra heat dissipation when your electronic or medical unit gets hot.
Owing to their clarity, these Eazi Stops can be used under a huge variety of: acrylic counter display units, to help to prevent sliding. When used under coloured displays they will blend nicely with the colour of the unit.
These Eazi Stops can be used as non-slip spacers under glass to prevent glass from moving; and to take up any shock and vibration. These can also be used on kitchen chopping boards, drinks coasters and glass top furniture in hotels and homes.
These stick on feet can help to stabilize and prevent appliances from slipping or rocking and are ideal for added heat dissipation. Compared to similar products made from commercial grades of rubber these Eazistops will not mark the surface on which it sits as they are made from polyurethane.
Ideal for automotive applications as they can be used to prevent squeaks, rattles, noise and vibration within many sectors of the automotive industry.
The point of contact provides either a large contact area - or small depending on the shape of the Eazi-Stop Self Adhesive Bumper. This is ideal for: increased load capacity, better wear resistance, increased sound damping, & increased energy absorption.
As it helps to make unlevel items more aligned.
They allow for better heat dissipation on items such as Laptops, due to allowing for more space under the item, increased load capacity and making it less susceptible to being sheared off substrate.
Applied in small recesses
Although not necessary, these stick-on-feet can be applied in small recesses. This can be beneficial due to it: providing the target area for the Eazi-Stops bumper during attachment process, improves adhesive performance: impact absorption and shear strength, provides neater appearance, and provides uniform location.
|Load tolerance||5Kg per EaziStop|
|Hardness (shore A)||ASTN D-2240|
|Tensile Strength (Mpa)||BS903|
|Tear Strength (KN/m)||BS903|
|Abrasion Resistance (MG loss)||BS EN 5470-1:1999|
|Kinetic Coefficient of friction||ASTM D-1894-78|
Not sure if this EaziStop is correct for your requirements or require the Material Safety Data Sheet?
If you require the Material Safety Data Sheet (MSDS) for these stick-on-feet, or if you are not sure if they are right for your requirements, please do not hesitate to contact us and we will be happy to send it to you and advise you on your options.
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
- Mainland UK shipping for orders over £30 (excluding VAT, Glue Pots, and shipping) is free
- Mainland UK shipping for orders under £30 (excluding VAT, Glue pots and shipping) is only: £6.75
- Signed for - up to 3 working days is from only: £6.75
- Next day delivery - when ordered before 12pm is from only: £11.99
- Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
- Europe starts from only: £22.20
- US, China, Middle East & South East Asia only: £43.78
- Rest of the world from only: £61.58
If your goods are damaged in transit or deemed faulty due to factors beyond our control, we will advise you to return them. If you do not require replacement goods to be dispatched to you, we may offer a full refund. We provide this Returns Information to inform you of your responsibilities in the event of damaged or faulty goods. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. Checking the goods in the presence of the courier and noting any damages when signing is your responsibility. Alternatively, just a signature will confirm that you have received the goods in good order, and we may not consider refunds thereafter.