The Pressure Sensitive Adhesive Specialists in Adhesive Tapes & Glues
See our Starter Kit if you require the hose & gun for this pot?
This spray adhesive starter kit comes with everything you need to get up and running quickly. The 22KG TensorGrip® L40 Spray Adhesive, a 12FT Spray Adhesive Glue Hose, and the Spray Glue Gun.
Product description
Meet the all-new 22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive, your ultimate solution for bonding and HVAC applications. This high-performance adhesive has been carefully formulated to provide an extra-high initial grab. It is perfect for demanding applications where a robust and immediate hold is crucial.
Application Uses
H30 - Extra Hi-Grab HVAC (Heating, Ventilation, and Air Conditioning) General Purpose Polystyrene Spray Adhesive is a versatile adhesive used primarily within the HVAC industry for bonding insulating materials.
Its high grab and quick setting features make it suitable for a wide range of applications, not only within HVAC systems but also in other areas where its properties are beneficial.
Attaching Duct Insulation
It's ideal for attaching fibreglass or mineral wool insulation to metal ductwork, ensuring efficient thermal insulation and energy savings.
HVAC Insulation Panels
For bonding insulation panels inside HVAC systems, its high grab properties ensure quick and secure attachment.
Sealing HVAC Ductwork
Although primarily an adhesive, when used in conjunction with sealing products, it can help seal ductwork against leaks.
Underfloor Heating Insulation
It can be used to adhere insulation boards or panels to the subfloor in underfloor heating systems, ensuring effective thermal insulation.
Acoustic Insulation in Buildings
Beyond thermal insulation, it's effective for attaching acoustic panels or insulation to walls and ceilings to improve soundproofing.
Attaching Polystyrene Foam in Packaging
Its properties make it suitable for bonding polystyrene foam used in packaging, providing cushioning for goods during transportation.
Insulation in Refrigeration Units
Attaching insulation inside refrigeration units or cold storage rooms ensures temperatures are maintained efficiently.
Thermal Insulation for Water Tanks
It can be used to secure insulation materials around water tanks to prevent heat loss.
Bonding Insulation to Concrete or Brick Walls
This method is effective for attaching rigid foam insulation panels to masonry surfaces, enhancing building insulation.
Crafts and Model Building
Outside of industrial uses, its precision and high grab make it suitable for crafting and model building where polystyrene materials are used.
When using H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive, always ensure proper ventilation and follow safety guidelines, as the fumes can be harmful if inhaled in large amounts.
It's also essential to check compatibility with the specific materials you're working with, as some substrates may require different adhesive properties.
Versatile
This versatile 22L H30 adhesive is suitable for bonding a wide range of lightweight materials, including polystyrene, insulation materials, foams, fabrics, and various plastics. Its impressive heat resistance makes it ideal for HVAC (heating, ventilation, and air conditioning) applications, as it easily withstands rigorous environments and temperature variations.
Unique spray pattern
The H30's unique spray pattern ensures precision application, minimising waste and maximising bond strength. This easy-to-use, fast-drying adhesive sets quickly, allowing for rapid project completion and reducing downtime.
Large quantity size
The 22L container provides a generous quantity of adhesive, making it a cost-effective choice for large projects or frequent use. It's equipped with an ergonomic trigger for comfortable, controlled application, reducing strain during extended use.
Reliable and high performance spray glue
Remember, with the 22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive; you're not just buying an adhesive; you're investing in a product that brings efficiency, reliability, and high performance to your projects. Let the 22L H30 do the heavy lifting so you can focus on what you do best!
Suitable for metal sheeting
As part of our HVAC & Insulation range, H30 is a web spray adhesive suitable for metal sheeting, foam and insulation bonding applications. It is ideal for insulation converters - Foil to Rockwool.
TensorGrip® H30 is a non-chlorinated, high solids, synthetic rubber spray grade multi-purpose adhesive designed to bond quilt, fibrous insulation materials and fabrics to ductwork in HVAC markets. H30 is a versatile, high tack spray adhesive with a long open time and excellent strength for bonding a wide variety of substrates, including polystyrene & EPS, fabrics, upholstery, foam, plywood, MDF and many others.
Developed for
- Insulation
- Metal Aluminium Sheeting
- Polystyrene
Features
- HAPs (Hazardous Air Pollutant) free
- High tack
- Excellent room temperature contact bonds
- Excellent green strength and good heat resistance
Canister Evacuation and Render Safe Procedure
Please use the following information when getting rid of an empty canister.
NOTE - Always direct the valve outlet away from the person during the following procedures
Step A. EVACUATION
- Ascertain from weight of canister whether empty of liquid residues
- If liquid residue is remaining, invert the canister and open the valve a minimal amount to allow gradual pressure release, leaving it inverted until all pressure is released. Once pressure appears to be released, keeping it inverted, gradually open the valve fully to ensure no blockage has occurred in the valve, and ascertain evacuation is complete.
- If empty of liquid, invert the canister and fully open the valve to release pressure, and ascertain evacuation is complete.
- Once empty then, proceed to part B to puncture them.
Step B. RENDER SAFE PUNCTURING
- Check, by feel, whether the canister contains liquid residues. If yes, take additional care to avoid spillage during the following operations.
- Place evacuated canister in fly press jaws. Base end forward.
- Close operator protective guard. The wind chisel points down until the canister is fully pierced, then up to release. Remove the canister from the fly press.
- Alternatively, using a nail punch, puncture the bung on the canister neck (see image below)
- If the canister contains liquid residues and is still pressurised, pierce the canister twice and then empty it into the appropriate bulk waste liquid container.
- Disposal via waste recycling provider.
What materials can I bond with the 22L H30 Spray Adhesive?
The 22L H30 is suitable for bonding lightweight materials, including polystyrene, insulation materials, foams, fabrics, and various plastics.
Is this adhesive suitable for outdoor use?
The 22L H30 Spray Adhesive is designed to withstand varying temperature conditions, making it suitable for both indoor and outdoor applications.
How fast does the 22L H30 Spray Adhesive dry?
The adhesive is formulated to dry quickly for rapid project completion. However, drying time can vary based on environmental conditions such as temperature and humidity.
How much area can one 22L container cover?
Coverage will vary depending on the thickness of the application and the materials being bonded. Please refer to the product packaging for details on specific coverage.
Is the 22L H30 Spray Adhesive heat resistant?
Yes, this adhesive is designed with impressive heat resistance, making it ideal for HVAC applications.
Does the 22L H30 Spray Adhesive have any odor?
As with most adhesives, there may be a slight odour during application. However, once dried, it should not emit any noticeable odour.
What safety precautions should I take when using this adhesive?
Always use the adhesive in a well-ventilated area and avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water. Please refer to the product label for detailed safety instructions.
Can the 22L H30 Spray Adhesive be used on vertical surfaces?
Yes, the adhesive has an extra-high initial grab, which makes it suitable for vertical as well as overhead applications.
What should I do if the nozzle gets clogged?
If the nozzle, gun and hose (sold separately) get clogged, try soaking it in warm soapy water and then rinse with clean water. If the problem persists, you may need to replace the nozzle.
Is the 22L H30 Spray Adhesive eco-friendly?
The 22L H30 Spray Adhesive is formulated to minimise environmental impact. However, it's always recommended that empty containers be disposed of responsibly following local waste disposal guidelines.
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- Do Not store at temperatures over 50°C
- Avoid exposure to direct sunlight
- Do Not store directly on concrete floor
- For optimum performance, store at 18°C during use, but must always be above 1°°C
- When connected, keep the valve open and hose pressurised at all times
- Do Not close the valve until it is ready to connect to the new cylinder
- Release pressure in hose before disconnection
- Always test product to determine suitability for your particular application prior to use in production
Directions to use
This product is designed to be applied to two surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results, the the temperature of the adhesive and the surfaces being bonded should be between 60 degrees F - 80 degrees F (16 degrees C - 27 degrees C).
Use with adequate ventilation. When possible we recommend shaking the canister well before using. Attach and secure the hose tightly onto the spray gun with the required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tightened. Open the valve on the canister slowly and fully, and check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
Prior to use, Check compatibility by spraying a small A test patch of the adhesive is on the substrate. This product may degrade some substrates. Spray about 10-20 cm (4 inches - 8 inches) away at a 90-degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surfaces horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.
Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform the pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Canister Storage / Change Over
Turn the valve on the canister into the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister. Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until the liquid is clear which indicates that the hose and gun are clean. If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
Special Precautions
For optimum results, store the canister above 18°C during use, but it must always be above 10°C. Allow substrates to acclimatise to normal room temperature (18°C) for 48 hours before bonding. Do not exceed the open time of the adhesive. Keep the canister off cold concrete floors during use. If adhesive is expelled wet or as a jet, the canister is too cold - move to a warm environment and allow to thoroughly acclimatise before reusing.
CAUTION
- Use only in well ventilated areas
- DO NOT thin or reactivate with solvents
- DO NOT incinerate
- DO NOT expose to extreme heat over 50°C
- Keep away from sources of ignition
- Release pressure before disconnecting hose
- Test for suitability before use
MSDS and Technical Data Sheets MUST be read and understood before use. Information contained in this technical literature is believed to be accurate and offered in good faith for the benefit of the consumer. The company, however, cannot assume any liability or risk involved in the use of its chemical products since the conditions of use are beyond our control. Statements concerning the possible use of our products are not intended as recommendations to infringe on any patent.
Technical information
| Property | Value |
|---|---|
| Solids Content | 30.0% +/- 2.0% |
| Viscosity | 300 cps +/- 50 cps |
| Specific Gravity | 0.66 to 0.70 |
| Failure Temperature | > 95°C |
| Colour | Clear or Red |
| Flammability | Flammable adhesive with a flammable propellant |
| Dry time | 1-3 mins |
Disclaimer
The technical data contained herein is based on our present knowledge and experience. We cannot be held liable for any errors, inaccuracies, omissions or editorial failings that result from technological changes or research between the date of issue of this document and the date the product is acquired. Before using the product, the user should carry out any necessary tests in order to ensure that the product is suitable for the intended application.
Moreover, all users should contact the seller or the manufacturer of the product for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product. Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and in accordance with the stipulations set out in our general sales conditions.
The information detailed in the present technical data sheet is given by way of indication and needs to be more exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer.
Not sure if this spray adhesive is right for you?
If you are not sure this contact adhesive tape is right for your individual requirements, please do not hesitate to Contact our friendly sales team, and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Shipping Information
PSA Solutions offers the following shipping options:
- Mainland UK shipping for orders over £30 (excluding VAT, Glue Pots, and shipping) is free
- Mainland UK shipping for orders under £30 (excluding VAT, Glue pots and shipping) is only: £6.75
- Signed for - up to 3 working days is from only: £6.75
- Next day delivery - when ordered before 12pm is from only: £11.99
- Using your own carrier - your items will usually be available for collection after 48 working hours, simply contact us with your collection date
- Europe starts from only: £22.20
- US, China, Middle East & South East Asia only: £43.78
- Rest of the world from only: £61.58
Returns Information
If your goods are damaged in transit or deemed faulty due to factors beyond our control, we will advise you to return them. If you do not require replacement goods to be dispatched to you, we may offer a full refund. We provide this Returns Information to inform you of your responsibilities in the event of damaged or faulty goods. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. Checking the goods in the presence of the courier and noting any damages when signing is your responsibility. Alternatively, just a signature will confirm that you have received the goods in good order, and we may not consider refunds thereafter.
Product Questions
Product questions for our: Tuskbond One Contact Spray Adhesive 500ml Snagging Cans (A different size of this product)
- Hi, Is the spray ideal for bonding foam together also is it ideal for bonding foam to wood Thank You David.
- Hi David, Yes both applications would be fine. Be sure to apply a layer of adhesive to both surfaces and then bring them together and apply pressure as the adhesive layers start to skin over - Ian, Product Support Manager
- we use acoustic panels made from semi rigid fibreglass and which to stick them to walls usually painted will this work and to what temperature? - Peter
- Hi Peter, Yes this should be fine, as long as you spray both surfaces and allow the adhesive to start skinning before bringing the surfaces together. This will withstand temperatures up to about 70�C. - Ian, Product Support Manager
- Hi Is this good to stick vinyl paper backed borders to painted walls? Is this a standalone can or would i need a gun to go with it? - Mark
- Hi Mark, Thank you for your enquiry. I would not recommend our Tuskbond adhesive for this application due to the solid content in the adhesive! This could possible result in an uneven surface once dry and may cause your border to discolour after a period of time. Our recommendation would be to use standard wallpaper paste - Ian, Product Support Manager
- Hi, I am looking for some spray contact adhesive to stick laminate to MDF. Normally I would use tuskbond canisters with a spray gun but as I am working on this as a small project rather than for work, I don't have the budget to buy the gun and 22l canister. what sprays can you recommend to get the job done? Thanks Sofia
- Hi Sofia, this product will be my recommendation for what you require - Ian, Product Support Manager
- I am looking at your Tuskbond heat resistant spray adhesive and you advertise it as Class 1 approved. Is this the highest fire rated spray adhesive you have or do you have others? - Julia (Live Chat)
- This is the highest we have currently julia. What is your application Julia? - Ian, Product Support Manager
- I want to glue fire rated fabric onto fire rated card. Do you have a certificate for this product to say it is compliant with Class 1? - Julia (Live Chat)
- Leave me your email address and i will get the tech info over to you this afternoon - Ian, Product Support Manager
Product questions for our: (A different size of this product)
- What is the coverage of your 17.5kg contact adhesive - Live Chat
- Hello, it really does depend on the substrate and the operator who is applying it. Can I ask what substrate you are applying it to? - Ian, Product Support Manager
- MDF to Laminate - Live Chat
- If you can bare with me I will look into this for you [Contact details given] - Ian, Product Support Manager
- Thanks - Live Chat
Product questions for our: 17KG Tuskbond ONE FR Spray Adhesive - Class 1 Fire Rated (A different size of this product)
- Hi, We are currently working in Holland and using contact adhesive to fit plastic wall panels to both concrete and Plasterboard walls. We have approx 450 m2. Can you please advise what would be best to use for your selection. We would require the spray gun also. Thanks in advance - Martin.
- Hi Martin, this product will be ideal for what you require - Ian, Product Support Manager
- Hi, We need to stick some acoustic timber panels that weigh approx 3kg each to a painted wall, would this product be suitable to fix them? Thanks Richard
- Hi Richard, yes this will be ideal for your application - Ian, Product Support Manager
Product questions for our: L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 17.5KG (A different size of this product)
- Dear sir/madam, I hope my message finds you well. I am about to start a project where I need to glue some small pieces of plastic into a sheet of fabric. Now the small plastics are sitting together in a piece of tulle and I will jist glue them as they are onto the fabric. I just wanted to ask if you have any kind of adhesive that may be suitable for me in this case. I saw the L22 Non-Mecl Fine Web Spray Adhesive that mey fit my needs but any professional advice will be well received. Thank you in advance. Mr. Margarit
- Hello Margarit, and thank-you for your enquiry. The L22 would certainly suit your application, on the basis the plastic not too conformable, as this could signify a higher content of plasticisers. These could react with the glue. On that basis, L22 would be the way to go - Best Regards Matt, Product Support Manager
Similar Products
Tuskbond One Contact Spray Adhesive 500ml Snagging Cans
17KG Tuskbond ONE FR Spray Adhesive - Class 1 Fire Rated
Spray Adhesive Starter Kit - 17.5KG TensorGrip L40 | 12FT Hose & Spray Glue Gun
22L L72 One Way Stick Urethane Spray Adhesive
22L H45 - KoolTherm Panel Spray Adhesive
22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive
L40 Contact Spray Adhesive / Glue Spray Pot - 22Litre | 17.5KG
L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 17.5KG
L40 Contact Spray Adhesive / Glue Can - 500ML
H50 Hi Temp Polystyrene Spray Adhesive / Glue Canister 22L | 17.5KG
L22 Non-Mecl Fine Web Spray Adhesive / Glue Aerosol Can 500ML
110L H45 - KoolTherm Panel Spray Adhesive
L66 Solid Surface Compatible Spray Contact Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 22 Litre
TensorGrip L19 - High Performance Laminate & Edging Spray Pot Adhesive / Glue 22 Litre
TensorGrip LP61 - Platinum Web Spray Canister Contact Adhesive / Glue 22 Litre
TensorGrip L21 - Non-Mecl General Purpose Contact Spray Canister Adhesive / Glue 110 Litre
L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Can - 500ml - Class 1 Fire Rated
LP64 Platinum Mist Spray Contact Adhesive
L44 DCM Free Contact Spray Adhesive / Glue Spray Pot - 22Litre | 17.5KG
Tuskbond XPRO Contact Adhesive 500ml Aerosol Spray Glue Can
Tuskbond XPRO Contact Adhesive Aerosol Spray Glue Pot 22 Litre
Reviews for this product from confirmed past customers
To qualify to be added below, the reviewer must have purchased this product from us.
Peter
Its a great product, delivered promptly. Entirely satisfied!
The following reviews are from other sizes of this product
Product reviews for our: Tuskbond One Contact Spray Adhesive 500ml Snagging Cans (A different size of this product)
Peter
Its a great product, delivered promptly. Entirely satisfied!
Product reviews for our: Spray Adhesive Starter Kit - 17.5KG TensorGrip L40 | 12FT Hose & Spray Glue Gun (A different size of this product)
James Madden
Great product 5 Sent from my iPhone
Martin
Was doubtful when finding the product online. I wanted an easier option than Evo Stik cans that you spread on. The guy I spoke to ran through what i needed. The packaging was not that good but product not damaged. I must say for bonding Formica to birch ply it’s absolutely brilliant. Spray pattern is very accurate and no waste and more importantly no sticky hands. I would 100% recommend this product. Also it works out cheaper than evo stick Kindest regards
Product reviews for our: L40 Contact Spray Adhesive / Glue Spray Pot - 22Litre | 17.5KG (A different size of this product)
Mark Reed
EXCELLENT service and product at the best price I could find
T&R
Hi,
We at T&R Roofing have used this glue on several edpm flat roofs and it has performed excellant giving it a first class bonding and an excellent adhesive bond. We have recommended this glue to other roofing companies. We will be ordering our 4th bottle very soon.
Many thanks
Product reviews for our: L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 17.5KG - Class 1 Fire Rated (A different size of this product)
Michael Philpot
Hell of a good product, we fit white panel cladding , just going to order another cylinder. Love to be able to return the empty cylinders.