|Ingredient||Cas||Einecs||Contents %||Health (class)||Risk (r phrases)|
|Butane / Isobutane||106-97-8||203-448-7||20-30||f+||r12|
This tape comes with dark brown-black sheets or strips with no odour. In its manufactured and shipped state, it is considered a non-hazardous product.
In fire situations, this magnetic tape may release toxic combustion products including: dense smoke, oxides or carbon, organic and inorganic materials of unknown composition and toxicity.
PEL = osha's permitible exposure limit; an 8-hour time-weighted average (TWA) unless otherwise noted.
STEL = short term exposure limit. a 15-minute TWS concentration which should not be exceeded at any time during a workday. The duration of a STEL exposure should not be repeated more than 4 times per day, and there should be at least 15 minutes between successive exposures to the STEL.
NA = not available
|Total Nuisance Dust*||15 mg/m3||na||10 mg/m3||na|
|Respirable Nuisance Dust *||5 mg/m3||na||3 mg/m3||na|
No respiratory protection equipment is necessary for general handling of this product. If ventilation is inadequate during sanding and grinding operations to maintain airborne contaminants a levels below the PEL, a NIOSH/MSHA approved half-face, air purifying respirator with appropriate cartridge or canister approved for particulate with an exposure limit of not less than 0.05 mg/m3 should be worn.
If personal exposures exceeds 10 times PEL, consult a certified: industrial hygienist (CIH), for selection of the proper equipment.
No personal protective equipment is necessary for general handling of this product. In the event of sanding and grinding of this product, safety glasses with side shield, protective gloves, and protective clothing should be worn when handling this product. Between uses, all personal protective equipment (PPE) should be thoroughly cleaned.
if you are not if this wide-adhesive-magnetic tape is right for your individual requirements please do not hesitate to contact our friendly sales team and we will be happy to help you.
|Technical description||Technical values|
|Specific gravity||3.6 – 3.8 g/cc|
|Solubility in water||n/a|
|Appearance||black-brown sheets or strips|
(air = 1)
(n-butyl acetate = 1)
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
To qualify to be added below, the reviewer must have purchased this product from us.
Used product PSA3000w12 (A) combined with product PSA3000FA (B) to mount 100um polyester film over old wooden windows to create a removable secondary glazing. Tape A bonded well to the smooth polymer film while the foam adhesive of tape B provided good adhesion to the wood Because the magnetic properties of the tapes, they both could be mounted on the window frame before applying the polymer film for a job well done.
Good producT, good service, have used before and probably will again
Great product Well made very usefull for all sorts of application Magnets are strong , but would be more useful if a stronger one was available great value for money