The High Performance Security Glazing Tape, has a filmic release liner. This liner is ideal for easy non tear removal during difficult applications.
This glazing tape must be applied to surfaces that are: clean, dry and flat. A 50/50 mixture of isopropyl alcohol/water and a clean rag are recommended for moderate cleaning requirements. A stronger solvent, such as: high flash naphtha, may be required to clean oils and other contaminants.
Change any cleaning rags often and allow surface to dry prior to application.
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
This glazing tape must be applied to surfaces that are: clean, dry and flat. Position this tape on glazing leg so that the tape edge is aligned flush with the sight line.
Initial adhesion is obtained by applying firm, uniform pressure to the tape during application, prior to liner removal.
The tape should be knife cut and butted closely together at corners without overlapping, and a bead of an approved sealant may be applied at the butt joint after liner removal.
After application, the liner should not be removed until glass is ready for placement; avoid any unnecessary adhesive exposure.
This glazing tape, should be compressed a minimum of 10% for optimum adhesive performance and to provide an effective weather seal.
Structural glazing beads and stops are recommended, and windows and doors should be stored in a position where the weight of the glass is on the tape.
Setting blocks are recommended for all window and door systems.
The recommended temperature for this tape is: 60°F to 100°F (16°C to 38°C).
This adhesive glazing tape is compatible with most quality glazing sealants and components, and it is the user's responsibility to determine overall compatibility. If you are not sure please contact us.
This glazing tape should be stored indoors at 60°F to 85°F (16°C to 38°C), 45% to 55% relative humidity.
Shelf life under these conditions is one year.
For improved initial adhesion in cold temperatures, store this tape and sash/frame materials in recommended conditions until application.
Due to the variety of window and door designs, applications, and performance requirements, PSA Solutions Ltd, recommends testing this product for specific requirements prior to use.
|Test||Typical Value||Test Method|
|Product thickness ?||35.8 mils||PSTC-133|
|Peel adhesion – EXP ?||90 oz/inch||PSTC-101|
|Peel adhesion–LNR ?||60 oz/inch||PSTC-101|
|Shear adhesion||>24 hours @ 2.2 psi||PSTC-107|
|Service temperature||0°F to 150°F|
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
PSA Solutions offers the following shipping options:
If in the unfortunate event that your goods are damaged in transit - or are accepted by PSA Solutions as being faulty due to factors beyond our control - you will be advised to return such goods and a full refund may be offered should you not require replacement goods being dispatched to you. PSA Solutions reserve the right to apply charges for handling and transit on such occasions. It is your responsibility to check the goods in the presence of the courier, and if required note when signing that goods have been damaged. Alternatively just a signature will confirm that goods have been received in good order and that thereafter refunds may not be considered. Please contact us if you do experience any difficulties and we will try our best to help you.
To qualify to be added below, the reviewer must have purchased this product from us.
Top promt service with speedy dispatch, ant fault them , Definitely give them a 5 for product ,service and value.
Great service, easy, quick and good quality.
Good product did all I wanted. Score 5
Sent from my iPhone