Next day delivery available for Mainland UK orders placed in the next:(Orders are dispatched at 12pm each day)

Contact Adhesives, Liquid Cements, & Spray Glues



Contact Adhesives, Liquid Cements, & Spray Glues

What are Contact Adhesives, Liquid Cements, & Spray Glues?

We stock some of the best adhesive supplies, liquid contact adhesives, and spray glues you can buy, from some of the world's leading global adhesive manufacturers.

Our adhesive range contains a large number of glues. These being:

In our contact adhesive range

Contact Spray Adhesive Snagging Cans
This line of spray contact adhesives & glues come with both a spray can applicator, and the spray cans, and will adhere a wide variety of items, including / as: spraying glues, wood, metals, rubber, fabric, spray on glue adhesive, most plastics, cardboard, polythene and concrete, as well as decorative laminates. This adhesive can also be used to bond expanded polystyrene.

Products available in this line include:

  • Spray Can Glue Gun Extension
  • Tuskbond Contact Spray Adhesive 500ml Snagging Cans

Ethyl Cyanoacrylate (Industrial Strength Superglue)
This line of industrial strength super glue contains both bottles of Ethyl Cyanoacrylate, and Mitre kit - which contains the Cyanoacrylate, and an activator.

These particular adhesives rely less on surface moisture as a catalyst for forming their bond and are particularly good at bonding the following substrates: Plastics, Rubber, Wood, Paper, Leather, Metals, and other similar materials.

Products available in this line include:

  • 20g Bottle of Ethyl Cyanoacrylate (Industrial Strength Superglue)
  • 50g Bottle of Ethyl Cyanoacrylate (Industrial Strength Superglue)
  • Bondloc Mitre Kit (Cyanoacrylate Adhesive & Activator)

Epoxy Putty Sticks
This line of epoxy adhesive putties is ideal for: Permanent repairs to most plastic surfaces, damp, wet areas and underwater surfaces, to many substrates, repairs pipes, tanks and vessels made of copper, brass, bronze and other non-ferrous metals, to name just a few.

Products available in this line include:

  • 50g Bondloc Copper-Reinforced Repair Epoxy Putty Stick
  • 50g Bondloc Steel-Reinforced Repair Epoxy Putty Stick
  • 50g Bondloc Aqua Underwater-Reinforced Repair Epoxy Putty Stick
  • 50g Bondloc Plastic Repair Epoxy Putty Stick

Sterling D3 PVA Wood Glue Adhesives
This line of wood glue has a fast set adhesive, which has a high bond strength and excellent water resistance. It will bond virtually all woods, wood veneers and high-pressure decorative laminates.

Products available in this line include:

  • Sterling D3 PVA Wood Glue Adhesive

Bondloc Plastic Weld Structural Adhesive
Our Bondloc Plastic Weld is a toughened structural adhesive formulated for bonding dissimilar substrates. This plastic weld kit is ideal for Outdoor weathering or solvent exposure thermoformed plastic assemblies PVC, Fibreglass, Vinyl's, Acrylonitrile Butadiene Styrene (ABS), Steel, Aluminium, Stainless steels, Acrylics, Phenolic, Polycarbonate, Unprepared metals, Ceramics, Wood, Standard thermoset plastics, Styrenics, Noryl, Polyethylene terephthalate (PET), Wood, Concrete, Ceramic magnet & speaker assembly, Sign assembly, Adhering 2 sheets of PVC together, & similar applications.

Products available in this line include:

  • 28ml Bondloc Plastic Weld Structural Adhesive

In our Liquid Cement Glue range

500ml EVO-PLAS Tensol 70 Two Component Acrylic Cement
This line of liquid cements are ideal for: Sign making, Model making, Structural engineering and acrylic sheet repair.

500ml Tensol 12 Single Component Solvented Cement
The Tensol 12 is a cement glue which ideal for: the manufacture of internal signs from cast acrylic sheet & is suitable for joining items made from: 'Diakon' acrylic polymers, as well as Perspex - and General Fabrication.

In our Sprayable Contact Adhesives | Liquid Spray Glues range

Flooring Spray Adhesives (22kg | 22L | 100L | 100kg)

Products available in this line include:

  • Spray Adhesive Starter Kit - TensorGrip L40 | 12FT Hose & Spray Glue Gun

Construction Spray Adhesives (22kg | 22L | 100L | 100kg)

Products available in this line include:

  • Spray Adhesive Starter Kit - TensorGrip L40 | 12FT Hose & Spray Glue Gun
  • L40 Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
  • L40 Contact Spray Adhesive / Glue Canister - 110Litre | 110KG
  • L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Pot - 22Litre | 22KG
  • L17 Hi Temperature Resistant Web Contact Spray Adhesive / Glue Canister - 110 Litre | 110KG
  • L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 22L | 22KG
  • L22 Non-Mecl Fine Web Spray Adhesive / Glue Canister 110L | 110KG

Upholstery Spray Adhesives (22kg | 22L | 100L | 100kg)

Products available in this line include:

  • Spray Adhesive Starter Kit - TensorGrip L40 | 12FT Hose & Spray Glue Gun
  • F40 - Aggressive Tack Spray Contact Adhesive Pot 22 Litre | 22KG
  • F40 - Aggressive Tack Spray Contact Adhesive Canister 110 Litre | 110KG

This range covers spray glues for fabrics, foam, and for commercial upholstery applications.

Roofing & Insulation Spray Adhesives (22kg | 22L)
This range of liquid adhesive glue sprays are / have been: Approved by KINGSPAN® for bonding KoolDuct Insulation Mitre Joints, Approved by KINGSPAN® for bonding KoolTherm Insulation Panels, ideal for: Heating, Venting and Air Conditioning (HVAC) & as insulation adhesives, applications which need to be: CO-REZTM California Compliant.

Further still they are ideal for use in areas on vinyl and other high plasticised flooring and fabric applications that are prone to failing Bonding insulation like ISO boards to a variety of substrates, including: concrete, plywood, cementitious boards and brick, bonding vinyl, rubber and plastics, and are suitable for insulation and metal sheeting bonding applications to name just a few.

Products available in this line include:

  • 22L L72 One Way Stick Urethane Spray Adhesive
  • 22L H30 - Extra Hi-Grab HVAC GP Polystyrene Spray Adhesive
  • 22L H45 - KoolTherm Panel Spray Adhesive
  • 22L C10 - Polyurethane Foam Spray Adhesive
  • 22L H40 - Koolduct Joint Spray Adhesive

Spray Adhesive Cans (500ml)
These aerosol spray contact glue cans are CFC free, a multipurpose sprayable adhesive with low odour, developed to bond a wide variety of substrates. It has an excellent grab and a long open time. The product is delivered through a hose and spray gun system, which means the application is clean and efficient. After use, the gun is locked off and the system remains ready for instant re-use.

These spray mount glue will adhere to a wide variety of items, including: wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete, as well as decorative laminates. This adhesive can also be used to bond expanded polystyrene.

We also stock the spray gun applicator for the 500ml cans as well.

Products available in this line include:

  • L40 Contact Spray Adhesive / Glue Can - 500ML

Spray Adhesive Accessories
This line of adhesive spraying equipment includes, spray glue guns and other adheisve applicator accessories. This includes everything from glue guns, to glue hoses, and all of which are suitable for attaching to our 22L, 22kg, 110L, and 100kg pots and glue canisters.

Products available in this line include:

  • Spray Adhesive Applicator Roller
  • Spray Glue Gun With Extension Wand
  • Spray Adhesive Spray Gun & Hose
  • Premium Adhesive Spray Glue Gun
  • Economy Spray Gun
  • Spray Adhesive Gun Hose
  • Spray Adhesive Starter Kit - TensorGrip L40 | 12FT Hose & Spray Glue Gun

How to use contact adhesives?

How to use these liquid contact adhesives varies depending on the type of glue you are trying to apply. A couple of ways you can apply some of these are listed below; however, you will need to seek further information once you determine what type of spray adhesive you are wanting to use.

For our snagging can spray adhesives they can be used by:

USE IN A WELL VENTILATED AREA

  • Surfaces to be bonded should be clean, dry and free from dust and grease
  • Substrates should be conditioned before assembly. This is particularly important with laminates. Leave for 48 hours at 20°C with a relative humidity of 45-55%. Air should be able to circulate freely around the components
  • Connect the hose to the canister and the spray gun to the hose and tighten the connections
  • Open the valve on the canister. The valve should remain open until the canister is used up. Use the locking nut on the gun after use. Turning off the valve will result in the adhesive drying in the hose and gun causing blockages
  • Hold the spray gun at 90° to the surface and apply a uniform generous coat of adhesive, ensuring 80-100% coverage
  • Move the gun in parallel to the surface and pay particular attention to the edges
  • Do not allow the adhesive to puddle as this can cause an unevenness that can 'show' through the laminate
  • On porous surfaces, it may be necessary to apply a second coat. Always apply to the laminate first and spray one substrate horizontally and the other vertically
  • It is important to remember that Easy-Bond is a contact adhesive and forms its bond by sticking to itself, so there must be sufficient adhesive for this to happen
  • Allow the adhesive to tack up and protect from contamination whilst this happens. The adhesive is ready when it feels dry to the touch and does not transfer to the fingertips

How to apply 22kg, 22L, 110L, and 110kg, spray glues?

Where as for our 22kg, 22L, 110L, and 110kg, spray pots and canisters you would apply these as such:

These glues have been designed to be applied to two surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60 degrees F - 80 degrees F (16°C - 27°C).

Use with adequate ventilation. When possible we recommend shaking the canister well before using. Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.

Prior to use, Check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates. Spray about 10-20 cm (4” – 8”) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.

Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.

If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice.

Buy in bulk and save

Most of the glues and adhesives in this range come with bulk buying options - therefore the more you buy, the more you save.

Contact adhesive applications and uses

Our range of contact adhesive, glues and liquid contact cements have a wide variety of uses. Some of these are:

  • Ventilation and air conditioning (HVAC) systems
  • Approved by KINGSPAN® for bonding KoolDuct Insulation Mitre Joints
  • Approved by KINGSPAN® for bonding KoolTherm Insulation Panels
  • HVAC & Insulation adhesive
  • Applications which need to be: CO-REZTM California Compliant
  • For use in areas on vinyl and other high plasticised flooring and fabric applications that are prone to failing
  • Bonding insulation like ISO boards to a variety of substrates, including: concrete, plywood, cementitious boards and brick
  • Bonding vinyl, rubber and plastics
  • Suitable for insulation and metal sheeting bonding applications
  • Modelling
  • Manufacturer of signs from cast acrylic sheet
  • Joining items made from: Diakon acrylic polymers, as well as Perspex
  • General Fabrication
  • Flooring glues
  • Upholstery glues
  • Many applications for adhesives in the construction industry
  • Roofing
  • PVC
  • Fibreglass
  • Vinyl's
  • Acrylonitrile Butadiene Styrene (ABS)
  • Steel
  • Aluminium
  • Stainless steels
  • Acrylics
  • Phenolic
  • Polycarbonate
  • Unprepared metals
  • Ceramics
  • Wood
  • Standard thermoset plastics
  • Styrenics
  • Noryl
  • Polyethylene terephthalate (PET)
  • Wood
  • Concrete
  • Ceramic magnet & speaker assembly
  • Sign assembly
  • adhering 2 sheets of PVC together
  • and many, many more similar applications and materials.

Who are Pressure Sensitive Adhesive Solutions?

PSA Solutions Ltd, are: Contact Adhesives, Liquid Cement, & Spray Glues suppliers, based in Leicestershire, UK.

We have a large range of: adhesives, in our Leicester warehouse, ready to be dispatched - normally - within 2-3 days.

So if you can not see the adhesive you are looking for contact our friendly sales team for free advice.

Where can I find out more?

To find out even more technical information about pressure sensitive adhesive tape please see this Wikipedia page.