Construction Spray Glue | Spray Adhesives

TensorGrip® L22 is a 500ml aerosol spray can for permanent bonding of materials where immediate bond strength, water and high heat resistance are required. It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important

TensorGrip® L40 is a 500ml can of fast drying contact adhesive which is suitable for bonding a variety of materials to: Sheet timber, Metal, Standard laminate, Some hard plastics, Foam, Fabrics, Fibrous materials, and many other porous and non-porous substrates.

TensorGrip® L66 is a 500ml aerosol spray can which can cover an area up to 4M². This adhesive is a specialist Solid Surface web spray contact adhesive suitable bonding 3mm – 12mm sheets to most common wood-based substrates such as MDF and Ply. Tested with many common solid surface brands including Avonite & HI-MACS, TensorGrip® L66 meets and exceeds required bond strength and glue line flexibility requirements giving fabricators excellent adhesion results whilst hugely reducing fabrication processing time due to its immediate grab which eliminates curing/clamp time.

This spray adhesive starter kit comes with everything you need to get up and running quickly. The 22KG / 22 Litre TensorGrip L40 on spray adhesive, a 12FT Spray Adhesive hose, and the spray glue gun that all fit the contact adhesive spay canister.

TensorGrip® L40 is a General Purpose (GP) contact spray adhesive 22 Litre / 22Kg pressure pot of fast drying contact adhesive which is suitable for bonding a variety of materials to: Sheet timber, Metal, Standard laminate, Some hard plastics, Foam, Fabrics, Fibrous materials, and many other porous and non-porous substrates. It is arguably one of the best large pot spray adhesives you can buy and is supplied from a leading Global manufacturer.

TensorGrip® L71 is a plasticiser resistant adhesive, specially formulated for bonding: Aluminium, standard laminate, Vinyl, High plasticised flooring, Fabric applications, Rubber, Plastics and other similar materials

TensorGrip® L40 is a 110Litre / 110KG pot of fast drying contact adhesive which is suitable for bonding a variety of materials to: Sheet timber, Metal, Standard laminate, Some hard plastics, Foam, Fabrics, Fibrous materials, and many other porous and non-porous substrates.

TensorGrip® L17 is a 22L / 22Kg is a portable pot of fast drying contact adhesive which is suitable for bonding High-Pressure Laminates (HPL), GRP, particleboard, aluminium sheeting, standard laminate, plasterboard and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.

This adhesive is IMO WheelMark approved, has a Class 1 Fire rating, and has a BS 6222 Bond strength approval, along with a IMO A653 (16) Surface flammability approval.

TensorGrip® L17 is a 110L / 110Kg pot of fast drying contact adhesive which is suitable for bonding High-Pressure Laminates (HPL), GRP, particleboard, aluminium sheeting, standard laminate, plasterboard and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.

This product is IMO WheelMark approved and is Class 1 Fire rated.

TensorGrip® L22 is a 22L / 22Kg pot for permanent bonding of materials where immediate bond strength, water and high heat resistance are required. It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important

TensorGrip® L22 is a 110L / 110Kg pot for permanent bonding of materials where immediate bond strength, water and high heat resistance are required. It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The L22 can also be used for bonding sheet metals where surface preparation is very important

As part of our HVAC & Insulation range, H30 is a web spray adhesive suitable for metal sheeting, foam and insulation bonding applications, and is ideal for insulation converters - Foil to Rockwool.

As part of our HVAC & Insulation spray adhesive range, H45 is a California Compliant web spray adhesive suitable for insulation and metal sheeting bonding applications. Approved by KINGSPAN® for bonding KoolTherm Insulation Panels.

This spray adhesive is a polyurethane foam adhesive you can trust, a single-part moisture-cure urethane foam adhesive designed for bonding insulation like ISO boards to a variety of substrates, including: concrete, plywood, cementitious boards and brick

Our TensorGrip® L72 is a high performance, plasticiser resistant adhesive specially formulated for bonding vinyl, rubber and plastics.

TensorGrip® H50 is a 22L / 22Kg pot which is a hi-temp, polystyrene compatible spray adhesive developed to bond insulation materials to themselves and to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. H50 can also be used for bonding to sheet metal substrates where surface preparation is important, along with being suitable for polystyrene and foam insulation materials where a higher temperature is required.

As part of our HVAC & Insulation spray adhesive range, H45 is a California Compliant web spray adhesive suitable for insulation and metal sheeting bonding applications. Approved by KINGSPAN® for bonding KoolTherm Insulation Panels.

TensorGrip® L66 is a 22 Litre spray adhesive can which can cover an area up to 80M². This adhesive is a specialist Solid Surface web spray contact adhesive suitable bonding 3mm – 12mm sheets to most common wood-based substrates such as MDF and Ply. Tested with many common solid surface brands including Avonite & HI-MACS, TensorGrip® L66 meets and exceeds required bond strength and glue line flexibility requirements giving fabricators excellent adhesion results whilst hugely reducing fabrication processing time due to its immediate grab which eliminates curing/clamp time.

TensorGrip® L21 is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. TensorGrip® L21 is designed for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required and can also be used for bonding sheet metals, where surface preparation is very important.

TensorGrip® L19 is designed for bonding of all HPL laminate surfaces and edging materials to MDF, chipboard and plywood substrates. L19 has undergone extensive testing on FORMICA ColorCore, Magnetic Laminate, Fundamentals, Ligna and DecoMetal ranges to name a few, and is now QUIN ASSURED as the premium choice for laminating.

TensorGrip® LP61 is suitable for bonding HPL, veneers and almost all other decorative face laminates to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials, as well as plastic, aluminium sheeting, and synthetic leathers. This unique formulation is designed for permanent and LIFETIME GUARANTEED bonding of materials where high grab and superior bond strength are required.

TensorGrip® L21 is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials. TensorGrip® L21 is designed for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required and can also be used for bonding sheet metals, where surface preparation is very important.

TensorGrip® L19 is designed for bonding of all HPL laminate surfaces and edging materials to MDF, chipboard and plywood substrates. L19 has undergone extensive testing on FORMICA ColorCore, Magnetic Laminate, Fundamentals, Ligna and DecoMetal ranges to name a few, and is now QUIN ASSURED as the premium choice for laminating.